Just switched ECU for GIAC ECU... Why won't it start?
#1
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Hey guys,
I have a early 1999 Audi A4 1.8t AEB. I just tried to install a GIAC ECU but for some reason it isn't starting. It wouldn't start the first or second time I connected it. I took the case off and noticed the chip wasn't alligned right (it was slid down and 1 set of pins werent connected) so i realigned it and tried it again. This time it started and ran fine for about 30-60 sec then turned off. Once it turned off I tried to start it again and it wouldn't start again.
I tried draining the battery but that didn't work.
The harnesses are deffinately secure.
The stock ECU still works when I plug it in.
Can anyone help me?
I have a early 1999 Audi A4 1.8t AEB. I just tried to install a GIAC ECU but for some reason it isn't starting. It wouldn't start the first or second time I connected it. I took the case off and noticed the chip wasn't alligned right (it was slid down and 1 set of pins werent connected) so i realigned it and tried it again. This time it started and ran fine for about 30-60 sec then turned off. Once it turned off I tried to start it again and it wouldn't start again.
I tried draining the battery but that didn't work.
The harnesses are deffinately secure.
The stock ECU still works when I plug it in.
Can anyone help me?
Thread
Thread Starter
Forum
Replies
Last Post
rktskicar
S4 / RS4 (B5 Platform) Discussion
5
01-01-2007 08:25 PM
Avantgarde
S4 / RS4 (B5 Platform) Discussion
10
08-24-2005 06:37 AM
maggio
A4 (B5 Platform) Discussion
1
09-23-2004 04:45 PM