AudiHawk95

<center><img src="http://pictureposter.audiworld.com/84566/maf_adapter.jpg"></center><p>The adapter is a cut down OE MAF. I had a cheap *** adapter prior that was off center on the MAF restricting airflow. MikTip made the one in the picture, he did a great job on it.

btw, 3.5" will be a little too big. 3" will stretch over. IIRC a tiny bit of dish soap helps.

Ausfahrt

Dont waste time with S&amp;B no matter how large they don't have a velocity stack which is the key to the Akimoto.

1995Qsport

i cant seem to find the new akimoto cones anywhere?

Mr Dobey

how do you figure this?
Like the old K&amp;N adds "The dirtier the filter gets, the better it breaths"

nothing

The Akimoto FunnelRamIV has an integral velocity stack that accelerates the incoming air.

sdb90

yes, i too would like to know where to purchase an akimoto FR IV!

Ausfahrt

Just go to their site and contact them directly via phone. The shipping was cheap and quick from what i remember.

dowsett6

and cut out the supports and smooth out the airbox. and perhaps add some more holes at the front of it?

also would adding the heat repelling tinfoil stuff around the outside of the airbox help anything?<ul><li><a href="http://216.120.227.145/~racings//prod_fr4details.php?osCsid=374eda57890bf82efdd8f84 8f40be1cb">The FR IV</a></li></ul>

jgullam

<center><img src="http://pictureposter.audiworld.com/121001/vs2.jpg"></center><p>I won two on EBay a while back - If you don't mind purple.

It has a 4" outflow so you would need a silicone reducer ($15 on EBay)

I can't swear that it is a IV but the cross section is identical to what's shown on the Akimoto web site.

sdb90

with a 3" outlet, but thanks for the offer!