Phoenix X Project

I know that people have asked this before but can anyone give a me a link to order schrick cams. I've heard that Eurospec cams break and i've having a hard time finding a source for the schrick cams. AAH cam i've checked that a few of them have matching part numbers in the AFC engines so i'm staying away from those too.

V6tom

see some posts below:

__________________________________________

the 260° are very slightly noticeable on the 2,8l BUT do a great job on the 2,6l. We had one 2,6l with around 200 hp with these cams and some other mods.

266° is a great cam for a every day driver and a lot of in town driving you can "hear" the cam at the exhaust tips. The engine pulls strong at 4200rpm after IM switch over.

272° is my favourite cam, noticeable at idle but no hard shaking. Very noticeable at the exhaust tips, sounds like a V8 and very hard pulling at 4200rpm. Quattro and "old" 225/45/18 tires are slipping in third if the street is wet.

276° is a great cam but only for someone who will only drive on the highway and very little in town. Great for road racing.

Cheers
V6-Tom<ul><li><a href="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;ih=017&amp;sspagename=S TRK%3AMESE%3AIT&amp;viewitem=&amp;item=27006443631 0&amp;rd=1,1">http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;ih=017&amp;sspagename=S T

Phoenix X Project

<center><img src="http://pictureposter.audiworld.com/118225/sc_12v.jpg"></center><p>I've seen these but has anyone tired these out... plus i don't even see a manufacture name anywhere...

I'm really am just looking for schrick cams

Here is a pic of my current project

V6tom

Nice project you are running :-)

The 260° are the Schrick cams ...
Thats also why the cost more :-)

Cheers
V6-Tom

Phoenix X Project

Hmmmmm thats what i figured.. i've also heard that they have 264 also... do you happen to have any sources i can snag schrick cams?

V6tom

jup that is what I have heard too.
But cant find the source ...

Schrick now only sells the 260° may be they will sell the 264° as a special order item ??

For the 260° Schrick send a mail via ebay.<ul><li><a href="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;ih=017&amp;sspagename=S TRK%3AMESE%3AIT&amp;viewitem=&amp;item=27006443631 0&amp;rd=1">http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;ih=017&amp;sspagename=S TRK

90mtl

WOW!!! Is that an Audi AAH 12V... what'is the TB you have there?

AudiHawk95

Looks like a SC on top, custom fuel rail, etc., no?

Phoenix X Project

no AFC... TB came from a ford lighting.. this has been a project of my buddy and I in his garage for a year or so.. still need to work on the bottom end (need more money) but we've done like modified multilayer metal head gasket, full standalone, built head, water injection, blah blah blah... need to do some more work but she's a handful especially when i work full time. right now i'm waiting for my injectors from RC to get rebuild.. was kinda dirty... then hopefully get some dyno time this spring.. cuz you can only do so much on the streets

euro-tuner

does anyone have experience with euro-spec cams, Im looking to get some soon, but never heard from anyone with them...and if/when this gets done, is it a good idea to replace valves and springs too, or is that not a big deal??<ul><li><a href="http://www.eurospecsport.com/camshafts.htm">$600 seems like a good deal</a></li></ul>