Jon-1.8t

2.8 o2 sensors... use a 22mm crows foot or get the special o2 sensor tool?

pac1085

<center><img src="http://us.st12.yimg.com/us.st.yimg.com/I/sjdiscounttools_2033_362766069"></center><p>
i don't like using crows foot or open ended wrenches because i always seem to round out the o2 sensor.

hey, which o2 sensors did you end up going with? I need to buy some for my 30v.


this kind:

B5Davem

7/8" crows foot is the same

Jon-1.8t

Thats not the tool I was looking for. How you gonna get the socket over the wires... I thought there was was one like this:

<img src="http://www.ecstuning.com/stage/images/dis/11238/600/11238.jpg">

Jon-1.8t

wonder if advance auto parts has a similiar o2 sensor tool.

pac1085

<center><img src="http://www.shop.hydrofuelsolutions.com/images/1210363563543203693580.gif"></center><p>
you want one like this, it has the cut out for the wires. Advance auto parts and autozone sells them.

i found the direct fit bosch sensors for 100 bucks each on Amazon with free shipping too.

might just try the universal ones, with a PROPER soldering/splicing job. not sure yet.

Jon-1.8t

that looks like it will do the job... looks like i'm going there after work

Joe@AxisMotorsport

I bet we can beat that price, Phil. ;-) All you have to do is ask.

Kris Hansen

I prefer crow's foot. The special tool is great, but very easy to strip as it expands.

Kris Hansen

There, I asked.