Anyone driven a "true" MTM Stage 2 vs. Stage 1 and Exhaust.. .more
#1
Anyone driven a "true" MTM Stage 2 vs. Stage 1 and Exhaust.. .more
I have a 98.5 with a MTM Stage 1 Chip and Miltek Exhaust. I noticed a significant difference with adding the Miltek. I have a chance to get upgraded to a Stage 2 Chip for no significant cost. Will I notice the difference? I have searched the Forums and found no clear answer. Thanks for any input.
98.5 1.8TQMS MTM Stage 1, Miltek Cat-Back
K04 and Stage 3 MTM software coming soon...
Timing Belt Mod In Progress
<img src="http://pictureposter.audiworld.com/23488/pc2.jpg">
98.5 1.8TQMS MTM Stage 1, Miltek Cat-Back
K04 and Stage 3 MTM software coming soon...
Timing Belt Mod In Progress
<img src="http://pictureposter.audiworld.com/23488/pc2.jpg">
#4
the boost actually is 1.3bar on my stage2.
1.3bars from aprox 2800-3800rpm.
Very good torque from bottom...
Pleasing power, but lacks the top-end, of course when it's the K03. (no use rev more than 5000-5200 before changing...)
I've never tried stage 1...
Morten.
Very good torque from bottom...
Pleasing power, but lacks the top-end, of course when it's the K03. (no use rev more than 5000-5200 before changing...)
I've never tried stage 1...
Morten.
#5
AudiWorld Super User
I've driven a "true" DBW StageII...
...and by that I mean it had an MTM exhaust. Also driven a nDBW StageII, with a Borla exhaust. The DBW StageII was fast, boost came on strong at the lightest tap of the throttle. Haven't gotten a chance to really put the nDBW car through its paces, need to find some interstate before I can definitively say whether I can "feel" it. BTW, curious to know where the upgrade is coming from? Good luck
Andy
Andy
Thread
Thread Starter
Forum
Replies
Last Post
cpayne
Audi Original "S" Cars
8
01-02-2007 09:36 PM
nagaro-DMband
S4 / RS4 (B5 Platform) Discussion
2
06-13-2003 11:31 AM
ChrisS4
S4 / RS4 (B5 Platform) Discussion
4
10-18-2000 11:54 PM
Scott W
S4 / RS4 (B5 Platform) Discussion
4
09-27-2000 08:28 AM