Brakes went out, pedal to the floor. Mechanic says I have a split brake line...
#1
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I was sliding down an icy hill and pushed too hard on my brakes and the pedal just gave way. Now, I did not notice liquids anywhere and my reservoir still has fluid in it. Does it sound like it is my brake lines or my brake master cylinder?
#3
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
<center><img src="http://samstagsales.com/images/vw_matra_t10006a.jpg"></center><p>I'm with B5Davem on this(master cyl. replacement) except I'd be inclined to replace the booster as well. Usually if the brake fluid has gone into the booster it has a tendency to ruin the seals. If your DIYing the job, you'll need Audi tool#t10006a(see pic).
Just be sure all hydralic brake hoses have been completely inspected for cracks, bubbles, or splits.
Just be sure all hydralic brake hoses have been completely inspected for cracks, bubbles, or splits.
Thread
Thread Starter
Forum
Replies
Last Post
ptbo
Audi 5000 / 200 / V8 Discussion
3
09-22-2007 04:04 PM
Tonys1stAudi
A6 / S6 (C6 Platform) Discussion
2
08-30-2006 06:26 AM
wisconsin_quat
A8 / S8 (D2 Platform) Discussion
10
04-15-2006 01:16 AM
beep-beep
Audi 100 / A6 (C4 Platform)
6
05-07-2003 11:24 AM