A4 (B5 Platform) Discussion Discussion forum for the B5 Audi A4 produced from 1995-2001 B5 FAQ

Did some more messing around. Here's tonights round of codes....

Thread Tools
 
Search this Thread
 
Old 09-10-2006, 08:39 PM
  #1  
Senior Member
Thread Starter
 
Gldnrkt(GT3076R)'s Avatar
 
Join Date: Nov 2002
Posts: 7,157
Likes: 0
Received 0 Likes on 0 Posts
Default Did some more messing around. Here's tonights round of codes....

Some one tell me WTF this all means...pls. lol


VAG-COM Version: Release 607.2-UD

Control Module Part Number: 8D0 907 557 P
Component and/or Version: 1.8L R4/5VT MOTR HS ATP
Software Coding: 06201
Work Shop Code: WSC 05314
9 Faults Found:
18010 - Power Supply Terminal 30: Voltage too Low
P1602 - 35-10 - - - Intermittent
17833 - EVAP Purge Valve (N80): Short to Ground
P1425 - 35-00 - -
17955 - Boost Pressure Regulation Valve (N75): Short to Ground
P1547 - 35-00 - -
17880 - EVAP Leak Detection Pump: Short to Ground
P1472 - 35-00 - -
16486 - Mass Air Flow Sensor (G70): Signal too Low
P0102 - 35-00 - -
17604 - Oxygen (Lambda) Sensor Heater Circuit: B1 S1: Electrical Malfunction
P1196 - 35-00 - -
17606 - Oxygen (Lambda) Sensor Heater Circuit: B1 S2: Electrical Malfunction
P1198 - 35-00 - -
16518 - Oxygen (Lambda) Sensor B1 S1: No Activity
P0134 - 35-10 - - - Intermittent
16524 - Oxygen (Lambda) Sensor B1 S2: No Activity
P0140 - 35-00 - -

Readiness: 0010 0101




I'm gonna take a shot in the dark, since I didn't find ANY leaks at all, that I DID fry my MAF ,ala RayKhan style. lol
Old 09-10-2006, 08:45 PM
  #2  
Keeper of the Cash
 
Nate (ETKA+Scumbag)'s Avatar
 
Join Date: Sep 2004
Location: Iowa
Posts: 26,522
Likes: 0
Received 2 Likes on 2 Posts
Default Just a shot in the dark here but...

I think it might be electrical problems

:P
Old 09-10-2006, 08:45 PM
  #3  
Senior Member
Thread Starter
 
Gldnrkt(GT3076R)'s Avatar
 
Join Date: Nov 2002
Posts: 7,157
Likes: 0
Received 0 Likes on 0 Posts
Default

(gasp)
Old 09-10-2006, 08:47 PM
  #4  
Keeper of the Cash
 
Nate (ETKA+Scumbag)'s Avatar
 
Join Date: Sep 2004
Location: Iowa
Posts: 26,522
Likes: 0
Received 2 Likes on 2 Posts
Default Honestly though, everything but 18010 is connected in some way

Might want to check the connections at the ECU box.
Old 09-10-2006, 08:50 PM
  #5  
Senior Member
Thread Starter
 
Gldnrkt(GT3076R)'s Avatar
 
Join Date: Nov 2002
Posts: 7,157
Likes: 0
Received 0 Likes on 0 Posts
Default

how teh fvck??? They're huge plugs...the wires don't move!!!!!!
Old 09-10-2006, 08:50 PM
  #6  
Keeper of the Cash
 
Nate (ETKA+Scumbag)'s Avatar
 
Join Date: Sep 2004
Location: Iowa
Posts: 26,522
Likes: 0
Received 2 Likes on 2 Posts
Default

There are other connectors nearby there too, in the hole that connects to the PDB.
Old 09-10-2006, 08:53 PM
  #7  
AudiWorld Super User
 
kenny (dremel)'s Avatar
 
Join Date: Jan 2003
Posts: 12,980
Likes: 0
Received 2 Likes on 2 Posts
Default see if you can find an engine wiring harness diagram from your bentley or etka

all that stuff is on the passenger's side. start examining your wiring, particularly the grounds.

Good luck man...
Old 09-10-2006, 08:53 PM
  #8  
Keeper of the Cash
 
Nate (ETKA+Scumbag)'s Avatar
 
Join Date: Sep 2004
Location: Iowa
Posts: 26,522
Likes: 0
Received 2 Likes on 2 Posts
Default

Agreed, there is a common connection here.
Old 09-10-2006, 08:55 PM
  #9  
Senior Member
Thread Starter
 
Gldnrkt(GT3076R)'s Avatar
 
Join Date: Nov 2002
Posts: 7,157
Likes: 0
Received 0 Likes on 0 Posts
Default

PDB???
Old 09-10-2006, 08:59 PM
  #10  
Keeper of the Cash
 
Nate (ETKA+Scumbag)'s Avatar
 
Join Date: Sep 2004
Location: Iowa
Posts: 26,522
Likes: 0
Received 2 Likes on 2 Posts
Default

Power Distrubtion Block. Where are the fuses, relays, and power posts are.


Quick Reply: Did some more messing around. Here's tonights round of codes....



All times are GMT -8. The time now is 05:31 PM.