Finally finished installing the V&S Short shifter... i'm such a handi-tard
#1
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
it took me SOOOOO long... I kept running into the most retarded little problems that added to the time it took.
The biggest problem was put the new shifter back into the housing in the car, and it felt way too tight in there. The bottom of the shifter was hitting the rubber at the bottom, but I thought it probably just comes really close once I set it up right. So I put most of the other bolts in, and realized the bottom peice was rotated the wrong way... it was like an inch too low... i had to take it all out again, flip the stupid thing around and put it back together... SO frustrating.
It is an awesome shifter though. No complaints with it whatsoever. Should be like this stock. It feels just right.
The biggest problem was put the new shifter back into the housing in the car, and it felt way too tight in there. The bottom of the shifter was hitting the rubber at the bottom, but I thought it probably just comes really close once I set it up right. So I put most of the other bolts in, and realized the bottom peice was rotated the wrong way... it was like an inch too low... i had to take it all out again, flip the stupid thing around and put it back together... SO frustrating.
It is an awesome shifter though. No complaints with it whatsoever. Should be like this stock. It feels just right.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RMcQ
Audi allroad
12
12-24-2005 11:29 AM
BSK
A4 (B5 Platform) Discussion
4
04-09-2005 01:28 AM