Flasher Module/ turn signal (or lack there of)
09-20-2007, 07:38 PM
#1
AudiWorld Senior Member
Thread Starter
Join Date: Mar 2000
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
Flasher Module/ turn signal (or lack there of)
a couple days ago, my turn signals started intermitantly cutting out while still turned on, waiting to turn. Today, they just don't work at all.
Searching the forums, most of the posts I could find (mostly on the A6 boards) talk about a faulty relay in the flasher module. My hazard lights work fine however. Are hazards and turn signals controlled by the same module? If so, does this mean I likely need to replace the turn signal stalk itself? Anyone else experience this?
Searching the forums, most of the posts I could find (mostly on the A6 boards) talk about a faulty relay in the flasher module. My hazard lights work fine however. Are hazards and turn signals controlled by the same module? If so, does this mean I likely need to replace the turn signal stalk itself? Anyone else experience this?
09-20-2007, 07:49 PM
#4
AudiWorld Senior Member
Thread Starter
Join Date: Mar 2000
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
did that too, but...
still don't see anyone talking about turn signals not working, but hazards still working. Seems to me that would indicates it's not the hazard relay, but is it still possible that it is the problem as it seems to fairly common?
09-20-2007, 07:53 PM
#6
AudiWorld Expert
there are two relays within the same switch... the one responsible for turn signals usually craps...
out.
<img src="http://i34.photobucket.com/albums/d102/escape2music/A4/hazards-relay.jpg">
<img src="http://i34.photobucket.com/albums/d102/escape2music/A4/hazards-relay.jpg">
Thread
Thread Starter
Forum
Replies
Last Post
A4_b4_996
A4 (B5 Platform) Discussion
2
12-20-2004 07:22 AM