guys, I'm installing a oil pressure gauge and i'm not sure where the sending unit is
06-25-2003, 11:09 AM
#33
Elder Member
Join Date: Sep 2002
Posts: 14,366
Likes: 0
Received 0 Likes
on
0 Posts
I guess I will find out tomorrow. Should be installing the new oil feed lines
and return lines for the new turbo. We had to make our own flanges and the shop ordered all the fittings, I think they should have all the flanges and IC pipe back from the welder today. I think my next job will be to tackle replacing the fuel pump.
BTW I was able to get the wrench on the oil fitting from between the 2 intake runners and from the back side of the manifold once the coolant pipe and fuel rail were removed. I need to start taking pics soon and will try to do that tomorrow. The only real thing left is to finishing runner #4 for the manifold.
BTW I was able to get the wrench on the oil fitting from between the 2 intake runners and from the back side of the manifold once the coolant pipe and fuel rail were removed. I need to start taking pics soon and will try to do that tomorrow. The only real thing left is to finishing runner #4 for the manifold.
06-25-2003, 11:25 AM
#35
Member
Join Date: May 2001
Posts: 17,322
Likes: 0
Received 0 Likes
on
0 Posts
I lost the headlight on my motorcycle in the middle of that sucker one moonless night. About a 15.5
on the 10 scale of pucker. I didn't crash but I did spend about 10 minutes picking seat foam outta my a$$ and collecting my wits.
06-25-2003, 11:56 AM
#36
Elder Member
Join Date: Sep 2002
Posts: 14,366
Likes: 0
Received 0 Likes
on
0 Posts
Well I already removed all the vac lines around the intake manifold
since I was planning on removing it to take the oil line out. I guess if I have to I can just remove it to put the new line in, I still have to get to the back to put my oil pressure gauge sender in anyway.
Thread
Thread Starter
Forum
Replies
Last Post
ianbis
A4 (B5 Platform) Discussion
6
06-02-2002 06:19 AM
Francis R.
S4 / RS4 (B5 Platform) Discussion
0
07-23-2000 08:12 PM
