k04_j31 dyno results on dyno dynmatics dyno...
#1
AudiWorld Super User
Thread Starter
Join Date: Aug 2003
Posts: 5,209
Likes: 0
Received 0 Likes
on
0 Posts
k04_j31 dyno results on dyno dynmatics dyno...
apparently this dyno shows the lowest values at wheel vs mustang or dynojet<ul><li><a href="https://forums.audiworld.com/midatlantic/msgs/174209.phtml">https://forums.audiworld.com/midatlantic/msgs/174209.phtml</a</li></ul>
#2
AudiWorld Uber User
28% drivetrain loss? It's not that bad. Something's wrong with the car or that dyno is way off
isn't j31 the PC16 of ATWs? PC16s can put down something like 200WHP.
#3
Depends on the dyno. Dyno Dynamics read very low. Here's my dyno sheet (K04 with supporting mods).
<center><img src="http://TgrClw.smugmug.com/photos/128573828-L.jpg"></center><p>
#5
No idea. There was another B6 K04 guy running a GIAC file dyno'ing his car on the same day...
our numbers are very similar (I have 4 more hp, he has 5 more tq or something like that). TQ/HP curves were also about the same.
#6
stock injectors and 5bar? should be the 310cc at 3bar. Even my low numbers to the wheel were
higher than that. I was pulling timing. I was around 199hp and 235tq. Granted it was a dyno jet. I think.