Joao

My car is going into limp mode and giving me a P1557 code and if I drive it long enough I also get a P1113 and P1114. Can't find any vacuum leaks anywhere.

Now I just tried unplugging the MAF and see how it runs and it's much better without it. Check Engine light did come on and got P1556, P1113 and P1114's right away along with the MAF sensor code.

Erased the codes and plugged it back in and back to almost immediate limp mode as I drove away. Checked codes again and sure enough P1557.

Are these symptoms of a bad MAF or should I keep looking for another source of the problem?

Sorry for the long boring post.

Allroady DungBeetle

Did it take you more than about 2 seconds to come up with 34?

If so your MAF is bad.

Oh wait, it's not 34, it's 55 - durr.

;-P

qfrog Ti20

Lumber used to build boats?

Nate (ETKA+Scumbag)

Nay, check yer N75 valve.

Joao

and he has the same symptoms my car has...is his MAF no good.

Joao

I replaced it a year ago when I had a bad L hose and checked all the lines too it.

Nate (ETKA+Scumbag)

Bentley says that and that alone.

qfrog Ti20

you can fill in the rest.

Joao

Speaking of which. Going up on the 7th out of Caldwell for a check out. You're welcome to tag along

qfrog Ti20

I'm sure it is a good time and maybe one of these days I'll get it together and come along.