my next project.....
10-24-2001, 09:42 PM
#14
AudiWorld Super User
Join Date: Jun 2000
Posts: 4,769
Likes: 0
Received 0 Likes
on
0 Posts
front lighting for the gauge, backlighting for the smoked plexi.
It takes me atleast two hours total to prep, bake, mold, cut to size, mold again (since stock is not a perfect circle) sand, polish. I can make another one and sell it for $30 plus shipping.
not tinted tho. (automotive tint or spray tint works find)
SkydiveA4 bought one, not sure if he has used the one i made for him yet
not tinted tho. (automotive tint or spray tint works find)
SkydiveA4 bought one, not sure if he has used the one i made for him yet
10-25-2001, 05:17 AM
#19
AudiWorld Super User
cut with a drill press and a circle bit...gauge is 52mm, used a 51mm bit
and then sanded the edges. The gauge sits in place without glue....help in by tension. One thing to note is that you need a means to support the vent up. The weight of the hguage will force the vent down. I used the vent valve to suuport the gauge. The screws on my gauge sit on top of the vent valve...so I can't close the vent where the gauge is...no biggie for me. I haven't insulated it except for some electrical tape.
<img src="http://pictureposter.audiworld.com/4477/mvc-852f.jpg">
<img src="http://pictureposter.audiworld.com/4477/mvc-852f.jpg">
Thread
Thread Starter
Forum
Replies
Last Post
~DonQPremiumTequila~
S4 / RS4 (B5 Platform) Discussion
14
06-03-2004 05:03 PM
flying_low
S4 / RS4 (B5 Platform) Discussion
4
09-15-2002 05:08 PM
kutscha
A4 (B5 Platform) Discussion
13
08-27-2002 07:55 PM
Kim @ MotorKlasse.com
A4 (B5 Platform) Discussion
2
07-21-2002 10:40 PM