My Ride (Recent Pics)
#11
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
<center><img src="http://home.att.net/~amitch1/images/wkrim.jpg"></center><p>They really look sweet while in motion.<p><IMG SRC=" http://home.att.net/~amitch1/images/sigpic.jpg">
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.<ul><li><a href="http://www.acealloywheel.com">Ace Alloy Wheel</a></li></ul>
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.<ul><li><a href="http://www.acealloywheel.com">Ace Alloy Wheel</a></li></ul>
#12
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
for minimal damage...make sure you use a 5/64 bit like it says in the FAQ...don't just find any drill bit laying around....make sure it's 5/64...after you eat enough of the tab so that it's even with the back...see if it will slide out...if not...drill a little bit more...and repeat this process...its really not as bad as it sounds...sorry if i got some people paranoid...like i said...im just very impatient and I went at it like I was drilling Armageddon...Good Luck!! (Be steady and patient!)
#13
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
ride. Any Recommendations?
Also, I dont want to spend more than $750 on the suspension parts (not including labor).<p><IMG SRC=" http://home.att.net/~amitch1/images/sigpic.jpg">
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.
Also, I dont want to spend more than $750 on the suspension parts (not including labor).<p><IMG SRC=" http://home.att.net/~amitch1/images/sigpic.jpg">
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.
#14
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
<p><A HREF="http://registry.audiworld.com/audi/registry/details.asp?car=5103" target="Resource Window"><img SRC="http://pictureposter.audiworld.com/AudiWorldPics/2000/Ron_Csig.gif" alt="Click for registry entry" Border="0"></A>
<B> -Ron, CT</B>
<B> -Ron, CT</B>
#15
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
<p><IMG SRC=" http://home.att.net/~amitch1/images/sigpic.jpg">
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.
#16
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
<p><IMG SRC=" http://home.att.net/~amitch1/images/sigpic.jpg">
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.
98.5 1.8TQMS 17" Ace Desires, Y2K Projector Mod, more to come.
#17
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
is because the diameter of the 5/64 bit is the same size as the tab making it easier to drill it away...so going a little smaller to 3/64 wont make much of difference anyways
#18
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
No matter what suspension you put on it, make sure you get it set to the proper camber. I bought my car used as it was already lowered, and now I have to get a rim straightened because the camber was so off that it bent the rim. And plus, your tires will wear unevenly. I need new tires too =(<p>~Mike
<a href="http://registry.audiworld.com/audi/registry/details.asp?car=5694"><img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/mycar.jpg" border="0" alt="98.5 A4 2.8MS 30v Silver/Black"></a>
<a href="http://registry.audiworld.com/audi/registry/details.asp?car=5694"><img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/mycar.jpg" border="0" alt="98.5 A4 2.8MS 30v Silver/Black"></a>
#19
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
This is a bit over your limit, but you could then instead get H&R springs or others for less, and then bring the price down to low 700's. Labor would then be another 200 to 300. Those are sweet wheels BTW. I almost wish I had waited and got those. I know LLTek has a wheel very similar to that as well. It's a great design and a good choice on your part. Now lower it!<p>APR V.3,Remus,Eurosports,S4 17" Wheels
<a href="http://registry.audiworld.com/registry/details.asp?car=4776"> <img SRC="http://pictureposter.audiworld.com/Audiworldpics/2000/prashantrearsig.jpg" Border=0> </a>
<a href="http://registry.audiworld.com/registry/details.asp?car=4776"> <img SRC="http://pictureposter.audiworld.com/Audiworldpics/2000/prashantrearsig.jpg" Border=0> </a>
#20
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
my camber is a little negative too after lowering with the H&R race...nothing you can do.<p><I>2000 1.8TQMS Santorin/Ecru </I>
<B> MODIFICATIONS: </B>
Eurolit3 bulbs
H&R Race springs
<img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/idmodul_logo.gif"><img src="http://smilecwm.tripod.com/ut1/mgwhore.gif">
<B> MODIFICATIONS: </B>
Eurolit3 bulbs
H&R Race springs
<img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/idmodul_logo.gif"><img src="http://smilecwm.tripod.com/ut1/mgwhore.gif">