prijedor

Will i pass VT inspection with these codes?
I just got OBD II interface and Vag-Com 311.2 and VCDS-Lite,would these tools help me pinpoint exact reason/position for codes?
Car runs fine,no problems.If i clear codes they usually come back after 2 days.Would these codes pose any danger on 400 mile round trip that i am planing to take on 4/28?

4Driver4

Nice of you to take the time to look them up for us.

prijedor

Well,sure i understand.
My 2001 A4 2.8 quattro is my first OBD II car so i have no experiance with it and i only have it for 2 months now.
Any inputs on inspection and reliability?

4Driver4

It only takes a few minutes for you to search the codes on Google rather than expecting each person interested in helping do the searching themselves. It's more about courtesy than knowledge.

http://wiki.ross-tech.com/wiki/index...9/P1411/005137

http://wiki.ross-tech.com/wiki/index.php/17585/P1177

AudiMick

Every state has different rules, if they only sniff the tailpipe you might pass. In my state, they connect to the car via the OBDII port at the emissions station. If your check engine light is disabled, your readiness is not set, or you have any pending or actual emissions codes it's "game over".

Clearing codes and going to the test doesn't work because readiness will not be set.

Some states will allow certain codes and will allow a pass.

My state allows a second test for free.

prijedor

Thank you guys for your help.