180q

Finished the full S4 treatment today. A few pics of the install, if anyone cares:
Pulling off original sill:
<img src="http://pictureposter.audiworld.com/10200/dscn0339.jpg">
Leftover tape:
<img src="http://pictureposter.audiworld.com/10200/dscn0340.jpg">
Tape removed:
<img src="http://pictureposter.audiworld.com/10200/dscn0341.jpg">
Everything removed:
<img src="http://pictureposter.audiworld.com/10200/dscn0342.jpg">
Installing rear bracket:
<img src="http://pictureposter.audiworld.com/10200/dscn0343.jpg">
Rear bracket(s):
<img src="http://pictureposter.audiworld.com/10200/dscn0344.jpg">
<img src="http://pictureposter.audiworld.com/10200/dscn0362.jpg">
Front brackets:
<img src="http://pictureposter.audiworld.com/10200/dscn0345.jpg">
Door molding bracket:
<img src="http://pictureposter.audiworld.com/10200/dscn0363.jpg">
Velcro strip, and door molding clips:
<img src="http://pictureposter.audiworld.com/10200/dscn0365.jpg">
Rear bracket complete:
<img src="http://pictureposter.audiworld.com/10200/dscn0367.jpg">
Sills:
<img src="http://pictureposter.audiworld.com/10200/dscn0350.1.jpg">
<img src="http://pictureposter.audiworld.com/10200/dscn0351.jpg">
Compete:
<img src="http://pictureposter.audiworld.com/10200/dscn0348.jpg">
<img src="http://pictureposter.audiworld.com/10200/dscn0349.jpg">


Chad

cdagza

DAMM i didn't know that much work was involved!!!! looks good =)

jtenright

How much and how hard?????

180q

I'm not going to bother to add it all up. I did get quite a few breaks though. It really isn't too hard, but takes quite a while. It's very tedious...sitting on the floor all weekend!!

Chad

goku

Looks good...except for the S4 door sills :\

180q

Until a solution is found, that's how they'll have to stay....

Chad

MikeReno13

Looks like it came out well, good job.

"so you're foofighter"

remove the dbl tape from the old door sill.

180q

Hey Foo...thanks for the tips. It's either Goof off, or Goo gone. I can look tomorrow. What a pain in the butt that stuff is. I learned on the second side. I let it soak, while I setup the brackets, which made it a bit easier.

Chad
"sig-less"

180q

Thanks.