for those that have had the brake wear pad sensor come on even after splicing properly
02-25-2009, 09:49 AM
#1
AudiWorld Super User
Thread Starter
Join Date: Feb 2008
Posts: 9,463
Likes: 0
Received 0 Likes
on
0 Posts
for those that have had the brake wear pad sensor come on even after splicing properly
this was my problem
<Img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_5295.jpg">
I had had this spliced for over a year with no brake pad sensor light. It came on and I couldn't figure out what it was. I went in again today and felt the insulation on the wires that are from the female part of the sensor (i.e. the one attached to the car, not to the pad). Lo and behold the insulation broke and I found the culprit
i can finally see tracks on my cd player again
<Img src="http://i48.photobucket.com/albums/f230/imawesomea4/IMG_5295.jpg">
I had had this spliced for over a year with no brake pad sensor light. It came on and I couldn't figure out what it was. I went in again today and felt the insulation on the wires that are from the female part of the sensor (i.e. the one attached to the car, not to the pad). Lo and behold the insulation broke and I found the culprit
i can finally see tracks on my cd player again
Thread
Thread Starter
Forum
Replies
Last Post
@wesome
S4 / RS4 (B5 Platform) Discussion
6
02-27-2009 04:27 AM
tk1780
Audi 100 / A6 (C4 Platform)
2
09-22-2005 05:03 PM
JDreher
A4 (B5 Platform) Discussion
2
02-11-2003 07:20 AM