Trip to the drag strip
#1
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Well took the car to the track to test out the set of 225/45/17 drag radials that Hoosier made for me. Tires were able to hold a hard launch while running the Q16 tune which I added another 3 degs of timing and boost at 37psi. I figure I was making 650+whp, problem is that the 4+ year old clutch could not hold the power while actually getting plenty of traction.
60 ft = 1.54
330 ft = 4.58 with the clutch slipping pretty badly
1/8 = 7.1 at 92 (usually 110 mph)
1/4 = 11.5 at 97 coasting
http://videos.streetfire.net/video/S...tch_694950.htm
60 ft = 1.54
330 ft = 4.58 with the clutch slipping pretty badly
1/8 = 7.1 at 92 (usually 110 mph)
1/4 = 11.5 at 97 coasting
http://videos.streetfire.net/video/S...tch_694950.htm
#4
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Here is what the clutch looks like after pulling it out this morning.
![](http://www.centralvalleyspeed.com/photogallery/albums/userpics/10093/CIMG1897.JPG)
![](http://www.centralvalleyspeed.com/photogallery/albums/userpics/10093/CIMG1905.JPG)
Suprised the car still run 7.1 at 92 in the 1/8th with the way the clutch looks.
Picking up a Clutch Masters FX850 twin plate so we can test it in my car.
Suprised the car still run 7.1 at 92 in the 1/8th with the way the clutch looks.
Picking up a Clutch Masters FX850 twin plate so we can test it in my car.
#6
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Actually I was able to shift gears while the pedal was stuck at the floor, but once I pulled the pedal back up as I pulled off the track I was not able to shift gearts at all while the motor was running. I was able to drive it though, clutch just wouldn't disengage.
Just picked up a brand new Clutch Masters FX850 twin plate for the 1.8t which I am testing for them since I was the one that asked them to make it.![Big Grin](https://www.audiworld.com/forums/images/smilies/biggrin.gif)
Pics
![](http://www.centralvalleyspeed.com/photogallery/albums/userpics/10093/FX850_-_A4_1.8t.JPG)
![](http://www.centralvalleyspeed.com/photogallery/albums/userpics/10093/FX850_A4_flywheel.JPG)
![](http://www.centralvalleyspeed.com/photogallery/albums/userpics/10093/FX850_A4_flywheel_-_side.JPG)
Just picked up a brand new Clutch Masters FX850 twin plate for the 1.8t which I am testing for them since I was the one that asked them to make it.
![Big Grin](https://www.audiworld.com/forums/images/smilies/biggrin.gif)
Pics
Last edited by 600whpA4; 07-16-2009 at 04:35 PM.
Trending Topics
#8