Worth it to port/polish stock manifold?
#1
AudiWorld Super User
Thread Starter
Join Date: Jul 2001
Posts: 12,791
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Thinking about ATP GTRS Hardware with unitronics software, but also considering to port and polish the stock exhaust manifold. How much do you think it would cost?
#2
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
porting...may be not worth it. polishing, and gasket matching can be done at home for cheap.
i had mine extrude honed and then i gasket matched it myself. the extrude honing probably wasnt worth it.
i had mine extrude honed and then i gasket matched it myself. the extrude honing probably wasnt worth it.
#6
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
<ul><li><a href="http://www.supremepower.com/category/exhaust/exhaust-spp.html">http://www.supremepower.com/category/exhaust/exhaust-spp.html</a</li></ul>
Trending Topics
#8
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I have been port and polishing for a little while now and you would be surprised with the gains that it gives. My buddy has been port and polishing for quite a few years now and we recently started a business. feel free to contact me if you have any questions.
As for the exhaust manifold, our stock manifolds are extremely restrictive. Each inlet has nearly a 1/4 inch lip. By gasket matching and smoothing out the casting lines, we have only had happy customers.
As for the exhaust manifold, our stock manifolds are extremely restrictive. Each inlet has nearly a 1/4 inch lip. By gasket matching and smoothing out the casting lines, we have only had happy customers.
Thread
Thread Starter
Forum
Replies
Last Post
illbill
A4 (B5 Platform) Discussion
42
11-16-2005 08:40 AM
Hibiscus Red S4
S4 / RS4 (B5 Platform) Discussion
1
10-09-2005 09:57 AM
BigMouse
Audi 5000 / 200 / V8 Discussion
2
01-05-2002 11:43 PM
huachele
A4 (B5 Platform) Discussion
3
08-21-2001 08:02 PM