365mm...
#48
AudiWorld Expert
Thread Starter
The direction of the drilled holes is not really an issue with these rotors...
<center><img src="http://pictureposter.audiworld.com/6607/img_2033.jpg"></center><p>
as both the rotors are the same. No left or right differences.
One could say they are "straight-vane" but they are not...
The direction of the drilled holes is not really an issue, as long as the internal vanes of the rotor are going the correct way, for cooling purposes. As explained in the URL provided by nanotech...
These rotors(made by Brembo for Audi) have neither straight or curved internal vanes. ;o)
<img src="http://pictureposter.audiworld.com/6607/vanes.jpg">
They are simular to the DBA rotors...
as both the rotors are the same. No left or right differences.
One could say they are "straight-vane" but they are not...
The direction of the drilled holes is not really an issue, as long as the internal vanes of the rotor are going the correct way, for cooling purposes. As explained in the URL provided by nanotech...
These rotors(made by Brembo for Audi) have neither straight or curved internal vanes. ;o)
<img src="http://pictureposter.audiworld.com/6607/vanes.jpg">
They are simular to the DBA rotors...
#50
My Powerslot rotors are the same
Fronts have a clear distinction bet. left & right, but pattern on the rears is the same ( thus grooves point in "wrong" direction on one side). No issues though.