ftc3

I've just had to swap out the infamous coolant flange but when assembling everything back, I can't seem to get the valve cover vent tubing lined back up. This is my only issue. Everything else it good to go.

Specifically the one giving me trouble is the black metal tube in the back sticking straight up (see link). I can't figure out how it is suppose to lay back there. With all the wires its really crowded.

Does anyone have a picture of the back of the motor out of the car or an exploded diagram?<ul><li><a href="http://eatbittersweet.com/images/IMG_9264.jpg">http://eatbittersweet.com/images/IMG_9264.jpg</a</li></ul>

::blinde::

<img src="http://www.vagcat.com/epc/etka/B249/121480.png">

ftc3

Thanks but it doesn't show the right hoses.

::blinde::

<img src="http://www.vagcat.com/epc/etka/B273/103680.png">

javanator

Do you happen to know what #17 is called? TIA.

::blinde::

#17 is called Breather Tube. P/N 06B-103-213-T

ftc3

it goes back assembled in the car.

Does anyone know if it bolts to anything? It looks from the picture that there should be a bolt but I don't remember there being one and I don't have any parts left over.

dagmz6s

Im guessing you didnt do something with #22. you sure you tightened everything up right?

ftc3

Where I want to move the black metal hose, there is the bolt in the way where the top flange mount and there is another skinny metal tube that bolts over it.

Any ideas?

dagmz6s

but its gone now. I think it was him at least, I searched and his thread was the one that came up.