A4 (B6 Platform) Discussion Discussion forum for the B6 Audi A4 produced from 2002-2005

HARTE CHIP FOR A4 3.0 MAN

Thread Tools
 
Search this Thread
 
Old 04-12-2002, 02:42 AM
  #1  
New Member
Thread Starter
 
Voodoo's Avatar
 
Join Date: Dec 2001
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default HARTE CHIP FOR A4 3.0 MAN

I have been advised that a 'Hartge' chip will add 16-23kw and 30Nm if fitted in a A4 3.0 Quattro Manual (six speed). Unfortunately there are a very few A4 3.0's which have had chip upgrades in South Africa where I stay so I cannot confirm the above figures with someone locally. Does anyone know if these figures are realistic? What are the risks of fitting such a chip? Also what happens to the car's warranty (I have only done 6000km on the car and wouldn't like to lose the free maintenance plan which runs up until 120,000 km)? What would be an indicative cost in America (I have been quoted +- US $ 400 equivalent)?. Would an Audi dealer be able to detect that the chip has been tampered with? If anyone can answer these questions I would most appreciate your response as I am VERY KEEN to do this chip upgrade.
Old 04-12-2002, 03:41 AM
  #2  
Member
 
docjan_uk's Avatar
 
Join Date: Dec 2001
Posts: 16,944
Likes: 0
Received 0 Likes on 0 Posts
Default Re: HARTE CHIP FOR A4 3.0 MAN

Well, generally, if you do mods like chips, you are going to void the warranty.
I think the figures seem a little high, especially for a non turbo engine.
Apparantly, the have a "chastity belt", meaning the dealership would be able to tell if youve chipped etc.
Old 04-12-2002, 05:27 AM
  #3  
Junior Member
 
3.0 Dolphin's Avatar
 
Join Date: May 2001
Posts: 1,755
Likes: 0
Received 0 Likes on 0 Posts
Default Seems too good to be true...but if it is, I'm all over it! It will void the warranty, but sometimes

they don't check/don't care/or take it out before a major service.
Old 04-12-2002, 05:33 AM
  #4  
AudiWorld Super User
 
Mike/A.W.E.'s Avatar
 
Join Date: Oct 2000
Posts: 2,502
Likes: 0
Received 0 Likes on 0 Posts
Default Hartge is a BMW tuning house.

I don't think they are upgrading Audi's.<ul><li><a href="http://www.hartge.de/Uk/indexuk.html">Click here for Hartge's website</a></li></ul>
Old 04-12-2002, 06:05 AM
  #5  
Junior Member
 
3.0 Dolphin's Avatar
 
Join Date: May 2001
Posts: 1,755
Likes: 0
Received 0 Likes on 0 Posts
Default That's what I thought too...seems odd. hey mike any thoughts on a chip for the 3.0 from A.W.E.? ...

hp increase, torque, low end torque loss, issues...etc? TIA.
Old 04-12-2002, 06:31 AM
  #6  
AudiWorld Super User
 
Mike/A.W.E.'s Avatar
 
Join Date: Oct 2000
Posts: 2,502
Likes: 0
Received 0 Likes on 0 Posts
Default

Still in R&amp;D. GIAC should have it done in appx. 2 weeks.
Old 04-12-2002, 07:40 AM
  #7  
Senior Member
 
Auto Union Jack's Avatar
 
Join Date: Dec 2000
Posts: 6,516
Likes: 0
Received 1 Like on 1 Post
Default Suggest you tell Garrett to code for a Supercharger for the 3.0; very hot in Europe. 1st to market

gets the cash in North America. Just $.02.
Old 04-12-2002, 08:54 AM
  #8  
Senior Member
 
woofpup's Avatar
 
Join Date: May 2001
Posts: 5,424
Likes: 0
Received 1 Like on 1 Post
Default Well, there was a thread here yesterday about two other chips that add...

around 10KW and 25Nm to the stock numbers. I guess the figures you got are TOO much higher than that, but then again, I don't know if the 3.0 is spec'ed differently in South America. The 10 and 25 numbers were for European spec, I believe. Check out the thread below for links to the websites:<ul><li><a href="https://forums.audiworld.com/a4gen2/msgs/54131.phtml">https://forums.audiworld.com/a4gen2/msgs/54131.phtml</a></li></ul>
Old 04-12-2002, 10:25 AM
  #9  
Member
 
docjan_uk's Avatar
 
Join Date: Dec 2001
Posts: 16,944
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Well, there was a thread here yesterday about two other chips that add...

Generally, SA cars seem to be specced the same as european cars from the ones ive been in thus far.
Old 04-12-2002, 10:33 AM
  #10  
Senior Member
 
Auto Union Jack's Avatar
 
Join Date: Dec 2000
Posts: 6,516
Likes: 0
Received 1 Like on 1 Post
Default

Does the 3.0 have the chastity belt (bolts that need to be drilled out on ECM bracket)? TIA.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fishy66
A4 (B6 Platform) Discussion
21
06-19-2003 02:36 PM
4taz
A4 (B6 Platform) Discussion
0
11-27-2002 10:14 AM
4a2002a4
A4 (B6 Platform) Discussion
3
07-08-2002 02:13 PM
Voodoo
A4 (B5 Platform) Discussion
2
04-12-2002 05:31 AM
NP
A4 (B5 Platform) Discussion
1
12-16-1999 12:57 PM



Quick Reply: HARTE CHIP FOR A4 3.0 MAN



All times are GMT -8. The time now is 01:33 PM.