My exhuast header is broken. =(
#1
AudiWorld Super User
Thread Starter
Join Date: May 2005
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Started as a crack is on runner #4 and upon removal the flange broke off. The crack isn't on the weld, it is above it.
Bob has built a lot of headers and this is the first one he has even seen fail like this, but it is also the only one he has built that has been ceramic coated.
Not exactly sure how hot the stainless steel had to get to become that brittle but on close examination there were fine cracks showing on a couple of the other runners and at the collector seams.
A new header is being built and this time we are leaving it uncoated.
<img src="http://members.shaw.ca/myaudi5/header/IMG_3353.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3354.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3355.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3357.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3358.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3359.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3360.JPG">
Bob has built a lot of headers and this is the first one he has even seen fail like this, but it is also the only one he has built that has been ceramic coated.
Not exactly sure how hot the stainless steel had to get to become that brittle but on close examination there were fine cracks showing on a couple of the other runners and at the collector seams.
A new header is being built and this time we are leaving it uncoated.
<img src="http://members.shaw.ca/myaudi5/header/IMG_3353.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3354.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3355.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3357.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3358.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3359.JPG">
<img src="http://members.shaw.ca/myaudi5/header/IMG_3360.JPG">
#2
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
<center><img src="http://podi.ca/winstontemp/blitzkrieg/IMG_2759.JPG"></center><p>
<img src="http://pictureposter.audiworld.com/6607/p5.jpg">
<img src="http://pictureposter.audiworld.com/6607/p5.jpg">
#4
AudiWorld Super User
Thread Starter
Join Date: May 2005
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
but Bob had to leave to the US to supervise a race team for the Rolex 24 in Ohio, so I had to wait for him to get back before it could be fabricated and installed.
The support bracket will be installed this time but they do not think that the lack of one caused the cracks that are showing on the header.
The support bracket will be installed this time but they do not think that the lack of one caused the cracks that are showing on the header.
#6
AudiWorld Super User
Thread Starter
Join Date: May 2005
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I'm trying to get the videos we took of the manifold during dyno day and post them up.
When you see how hot it got you too would wonder how it survives such punishment.
When you see how hot it got you too would wonder how it survives such punishment.