shadyraven

<center><img src="http://pictureposter.audiworld.com/37283/turboinstallationkit-vi.jpg"></center><p>I've figured out where the four silver ones go, and one copper... but what about the remaining copper washers?

The pictures is not mine.

Aarononymous

2 on the oil feed at cooler &amp; 2 on coolant return on block? 2 extras???

shadyraven

The four silver ones go on the coolant return line - two on either side of the bango bolt that connects to the turbo and two on either side of the bango bolt that contects to the block. One smaller crush washer is need for the oil line feed connector on the turbo, and a second crush washer is needed for the coolant feed line connector, also on the turbo.

MikTip

as often during shipping they get disfigured...

shadyraven

by my count, I'm one short on the large silver kind, and three over with the copper

MikTip

You gonna have your Audi running for summer?

diagnosticator1

Only one washer per side on the banjo bolts, two total for each banjo bolt.

shadyraven

My new torque wrench finally arrived, so I'm now ready to put everything back together.