shadyraven

I just had one installed and the tip alignment could look a lot better.

Matt Devo

get a muffler place (meineke etc) to do it. pics in PP

audigirl07

<img src="http://pictureposter.audiworld.com/86529/dsc01889.jpg">

<img src="http://pictureposter.audiworld.com/86529/audi3.jpg">

Can you post a pic of yours?

Projekt 8E

a lot. Could be adjusted of course though.

audigirl07

The diameter of the openings on this oetty rear bumper is about 5.75 inches, a little larger than the regular US spec one. The tips on these by the way are 3.5inches. Seems like the right one is a little in, where on my car, the left one is a little in.
<img src="http://pictureposter.audiworld.com/86529/dsc02083.jpg">

audigirl07

The left one is slighty in, but at first it seemed fine like in this pic.

<img src="http://pictureposter.audiworld.com/86529/dsc01887.jpg">

But now, it is a little in.

On a side note, do you think my tips stick out too much? It does expand a little when hot, but even before it gets hot, sometimes I think it sticks out a little too much. Here are a few pics. Tell me what you think.

Before hot.
<img src="http://pictureposter.audiworld.com/86529/dsc02167.jpg">

After being driven for like 30 min. (Different days btw)

<img src="http://pictureposter.audiworld.com/86529/dsc02091.jpg">
&lt;

Matt Devo

<img src="http://pictureposter.audiworld.com/52813/dscn2176.jpg">

QuattroRocket

Mine has shifted after driving a while too Raven.

chuckdawg82

I think most exhausts are built to spec based on the stock bumper. The stock bumper is actually slightly further out than the USP so the exhaust on stock bumper would probably fit pretty flush, but with yours it's a little long.

Projekt 8E

more than what i would have...but it's all a matter of the owners opinion.