UPDATE: Oil catch can installation...
10-24-2009, 07:39 AM
#1
AudiWorld Super User
Thread Starter
Join Date: Nov 2002
Location: Montreal, Canada
Posts: 18,597
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE: Oil catch can installation...
Last year the catch can was installed in a temporary matter. Now it was time to install it permanently in its new location.
The new location is roughly where the OE radiator overflow/refill tank was located. Since the oil catch can is one of a vertical design not requiring a lot of room we thought this was a good location for it.
So some permanent studs where installed.
A custom made aluminium bracket was made.
Another angle.
An aluminium bolt was used to secure it in place.
Close up of the catch can and the bracket once installed.
Overall view of the catch can installation.
The new location is roughly where the OE radiator overflow/refill tank was located. Since the oil catch can is one of a vertical design not requiring a lot of room we thought this was a good location for it.
So some permanent studs where installed.
A custom made aluminium bracket was made.
Another angle.
An aluminium bolt was used to secure it in place.
Close up of the catch can and the bracket once installed.
Overall view of the catch can installation.
Thread
Thread Starter
Forum
Replies
Last Post
Blue TTop
TT (Mk1) Discussion
24
01-29-2006 11:50 AM
Craigito
A4 (B5 Platform) Discussion
3
04-12-2003 09:11 PM
