Last edit by: IB Advertising
See related guides and technical advice from our community experts:
- Audi A4 B8 Why is Annoying Noise at the Front End<br>Guide to diagnose trouble and recommended solutions.
Annoying front end noise
#51
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Check control arm bushings, and outer tie rod end joints for dry (i.e.- collapsed rubber boots). Problem with this is that most newer models have sealed units (no grease nipples) so lubing cannot be done until tie rods are replaced with type with grease nipples. Easy enough if you have the knowledge, and the proper tools to do yourself. Either way, if you have mech. replace, make sure they install tie rids, ball joints etc, WITH grease nipples, not without, and you can avoid future problems with a grease gun. Hope this is some help.
Sgb/unidrv
Sgb/unidrv
Thread
Thread Starter
Forum
Replies
Last Post
JeanieJuice
A4 (B7 Platform) Discussion
1
02-25-2013 06:11 AM
wlaudi
Suspension Tuning Discussion
7
10-11-2012 08:52 AM
iceberg_slim
A4 (B5 Platform) Discussion
0
11-25-2002 08:39 AM