danikas

can anyone tell me the part number of the E470 driver seat adjustment switch ?i have electric seats and am trying to retrofit memory on them but it appears that the switch is different ?Also will the motors need to be changed as well?I study the elsa and can change the cabling but am not sure that the position sensors on the motors excist since the wiring is not there (ON MY ELECTRIC SEATS)...
any help will be appreciated ..
ARI
PS: WERE CAN I GET A SECOND HAND MEMORY CONTROLER??

ThePiombino

You should reach out to DavidB8

NPuter

lol - I was just thinking about this...
by the looks of it, you need to add the memory control module, swap out the motors (for position sensing ones), and install the switch...

danikas

well this is the problem,according to etka page 959-20 on a4 all road 2010,the motors are the same for memory or not with part number for example of motor for rake adj,8k0959761 and on extra info it gives : 3l4 (memory)3l5 (electric) 3pb.so in theory they all must have position sender build in and the wiring changes to 4 pins (memory)from 2 pins(non memory)also the switch has to change to version B, (3L4) ONE PLUG 6 PIN ONLY attached to it from the two plugs for the electric only seat version switch..
can any one verify this?