DirkM

Grey lines means its active/on but not engaged. Since you don't have Adaptive Cruise Control you will need to drive 40mph or faster for Lane Assist to engage and look for lanes. Not sure if Traffic Jam Assist (the steering only, below 40mph) can be enabled without Adaptive Cruise Control.

Azz123

Mitchfin, have you got the radar bubbles fitted to your car? Down where the fog lights would normally be?

Mitchfin

It doesn't go green at any speed. Only driven up to 60 since activated but the data in obdeleven says that there is no lane value but it can recognize 3 lane markings.

Mitchfin

No. I wouldn't ever use the adaptive cruise control features so I wouldn't want to pay for it

Azz123

Has anyone had any luck getting into Adaptation or Coding in Module 13 (Adaptive Cruise Control) using an OBDEleven?

I'm getting a "Something Went Wrong" error. Posted the issue on their forum a couple of weeks ago though have had no response.

Azz123

I was under the impression that the ACC Radar is used as part of the Lane Assist.
I could be wrong though.

I've got Lane Assist, let me know if there are any values that you would like.

Top1105

I believe you would be missing additional hardware that came with the prestige package, that would be used for lane keep assist. Like additional cameras that are part of the "top view camera system" and the front parking sensors.

Does your car have this camera?

Mitchfin

the windshield mounted camera is the only one used for lane assist.

Mitchfin

are you in Canada? Lane assist is only available with full Driver Assist in the US. Id love some coding! Can I PM you for those?

Azz123

I'm in Australia and have the full driver assist.

Let me know any adaptations or codes you're after (stock) - PM might be easier as to not litter the thread.

I found this to be a handy link for tweaks all in the one place. Use Chrome, the translate is one click.

Audi A4 B9 ab Bj 2015 ? Audi Coding Wiki