2017 A4 coding tweaks
#381
AudiWorld Member
Thanks, I thought ACC (accessory) was in ref to the PDC coding above it.
#382
AudiWorld Senior Member
#383
Has anyone found how to have the VC remember your settings from last time? There must be a "last setting" somewhere...
Someone mentioned that it is behaving in their car this way but they are not sure how they achieved it....
Someone mentioned that it is behaving in their car this way but they are not sure how they achieved it....
#384
AudiWorld Senior Member
Not yet. I haven't seen any clear setting for it either and it doesn't occur in other markets so it may not exist.
#386
AudiWorld Senior Member
#387
AudiWorld Newcomer
Join Date: Nov 2016
Location: Nashville TN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#388
AudiWorld Senior Member
The us does not have the same parking system. We are missing 4 outward sensors and coding. So it would be 2 new bumpers, paint, and the 4 sensors and wiring harness as well as install and coding.
#389
I just foung this coding for VZE here but I can't test it yet.
VZE (Matrix-LED installed, here there were discussions about whether there are different cameras, but have not pursued):
STG 5F (information electric)
STG adjustment
Select vehicle function list BAP-traffic_sign_recognition_0x21
Value to active
Vehicle menu operation-menu_display_road_sign_identification
Value to enabled
Vehicle menu operation-menu_display_road_sign_identification_over_thresho ld_high select
Value to enabled
STG A5 (front / front panel camera)
STG Access Permission
Enter the free code 20103
STG Long coding
byte 1
Activate bit 0
STG adjustment
Show the end of the speed limit
Set value to active
Show selected channel
Adjust value accordingly
STG 17 (switch bezel insert)
STG Long coding
byte 5
Activate bit 2
Thanks for the good job.
#390
AudiWorld Senior Member
Hey! My first reply here.
I just foung this coding for VZE here but I can't test it yet.
VZE (Matrix-LED installed, here there were discussions about whether there are different cameras, but have not pursued):
STG 5F (information electric)
STG adjustment
Select vehicle function list BAP-traffic_sign_recognition_0x21
Value to active
Vehicle menu operation-menu_display_road_sign_identification
Value to enabled
Vehicle menu operation-menu_display_road_sign_identification_over_thresho ld_high select
Value to enabled
STG A5 (front / front panel camera)
STG Access Permission
Enter the free code 20103
STG Long coding
byte 1
Activate bit 0
STG adjustment
Show the end of the speed limit
Set value to active
Show selected channel
Adjust value accordingly
STG 17 (switch bezel insert)
STG Long coding
byte 5
Activate bit 2
Thanks for the good job.
I just foung this coding for VZE here but I can't test it yet.
VZE (Matrix-LED installed, here there were discussions about whether there are different cameras, but have not pursued):
STG 5F (information electric)
STG adjustment
Select vehicle function list BAP-traffic_sign_recognition_0x21
Value to active
Vehicle menu operation-menu_display_road_sign_identification
Value to enabled
Vehicle menu operation-menu_display_road_sign_identification_over_thresho ld_high select
Value to enabled
STG A5 (front / front panel camera)
STG Access Permission
Enter the free code 20103
STG Long coding
byte 1
Activate bit 0
STG adjustment
Show the end of the speed limit
Set value to active
Show selected channel
Adjust value accordingly
STG 17 (switch bezel insert)
STG Long coding
byte 5
Activate bit 2
Thanks for the good job.
That use MIB but is not the same in the newer MLBevo cars. But STG A5 byte 1 bit 0 only changes the cars vehicle class coding. And there is no adaptation for show end of speed limit in A5. But also in 5F road_sign_recognition_0x21 has a second setting that needs to be set to via terminal 15.
Believe me I have tried every conceivable way to turn on VZE and there is nothing currently interpretable that can activate it.