caster

Step 1: Pry out old piece gently with flat head screw driver. Comes out nice and easy!

Step 2: Remove rivit circled in red from both sides

<img src="http://pictureposter.audiworld.com/38744/2.jpg">

Step 3: Flip unit upside down and insert screw driver here and pry towards the edge lightly

<img src="http://pictureposter.audiworld.com/38744/3.jpg">

Rivit will protrude like

<img src="http://pictureposter.audiworld.com/38744/4.jpg">

Step 4: remove with pliers ( i used channel locks)
<img src="http://pictureposter.audiworld.com/38744/6.jpg">

Step 5: OPEN
<img src="http://pictureposter.audiworld.com/38744/7.jpg">

TO COME:

We need to install springs here so it stays opens and closes nicely

<img src="http://pictureposter.audiworld.com/38744/4.jpg">.

Also the inside needs velvet.

Beside that you got a fully functional sunglass mod for $5.

This was typed in 5 minutes. If you need assistance or clarification, post a reply!

HonktheHonkie

NO SENSE

neversc0t

Step 1: Pry out old piece gently with flat head screw driver. Comes out nice and easy!



Step 2: Remove rivit circled in red from both sides




Step 3: Flip unit upside down and insert screw driver here and pry towards the edge lightly




Rivit will protrude like




Step 4: remove with pliers ( i used channel locks)




Step 5: OPEN




TO COME:

We need to install springs here so it stays opens and closes nicely




Also the inside needs velvet.

Beside that you got a fully functional sunglass mod for $5.

This was typed in 5 minutes. If you need assistance or clarification, post a reply!

neversc0t

Whick type of spring I should buy and how to install it?

Thank you!