A6 allroad (C8 Platform) Discussion Discussion forum for the C8 Audi A6 allroad produced from 2020

2022 A6 Allroad Firmament Blue - Build thread

Thread Tools
 
Search this Thread
 
Old 03-22-2022, 05:04 AM
  #21  
AudiWorld Member
 
TropicGreenA4's Avatar
 
Join Date: Jul 2003
Location: Harrisburg, PA
Posts: 517
Received 103 Likes on 58 Posts
Default

Originally Posted by Sam Adams
And CETE just arrived!
are you planning to do the CETE install yourself?
Old 03-23-2022, 06:18 PM
  #22  
AudiWorld Member
Thread Starter
 
Sam Adams's Avatar
 
Join Date: Mar 2003
Location: Bellevue, WA
Posts: 67
Received 38 Likes on 23 Posts
Default

Yes I found a local place that rents lifts for $50 /hr so I will do my best. A nearby shop wanted $500 to install. After watching a few youtube videos it does not seem that hard, and I am not all that handy.
Old 03-24-2022, 03:08 AM
  #23  
AudiWorld Member
 
TropicGreenA4's Avatar
 
Join Date: Jul 2003
Location: Harrisburg, PA
Posts: 517
Received 103 Likes on 58 Posts
Default

Originally Posted by Sam Adams
Yes I found a local place that rents lifts for $50 /hr so I will do my best. A nearby shop wanted $500 to install. After watching a few youtube videos it does not seem that hard, and I am not all that handy.
let us know how it goes!
Old 03-26-2022, 02:50 PM
  #24  
AudiWorld Member
Thread Starter
 
Sam Adams's Avatar
 
Join Date: Mar 2003
Location: Bellevue, WA
Posts: 67
Received 38 Likes on 23 Posts
Default

Originally Posted by TropicGreenA4
let us know how it goes!
Anyone looking to do a CETE install watch this. It starts around the 23 minute mark.
Probably the best tutorial I have found. Oddly enough they are a local shop about 15 minutes from me but I want to try the installation myself as they quoted me 3.5 hrs of labor which we all know it's bs.
Old 03-26-2022, 02:53 PM
  #25  
AudiWorld Member
Thread Starter
 
Sam Adams's Avatar
 
Join Date: Mar 2003
Location: Bellevue, WA
Posts: 67
Received 38 Likes on 23 Posts
Default

A couple of updates.

PPF in the front installed, Rocker panels and hatch. Tint 15% which I think it's perfect


The following users liked this post:
BobGeorge (03-27-2022)
Old 03-26-2022, 03:00 PM
  #26  
AudiWorld Member
Thread Starter
 
Sam Adams's Avatar
 
Join Date: Mar 2003
Location: Bellevue, WA
Posts: 67
Received 38 Likes on 23 Posts
Default

Had the shop also paint the brakes with enamel (not rattle can) bright red. I found some stickers off ebay that I think they complement the look. $700. Not cheap but I know the paint will not chip and they almost look like aftermarket brakes. Car is a bit filthy after a long road trip. Next are the CETE suspension install and I am going to repurpose some ABT 20" wheels from my old A6. I will use the stock tires for now until I decide what to do next.



The following 2 users liked this post by Sam Adams:
ar5154 (03-28-2022), Turboale (05-02-2022)
Old 03-31-2022, 06:11 PM
  #27  
AudiWorld Member
Thread Starter
 
Sam Adams's Avatar
 
Join Date: Mar 2003
Location: Bellevue, WA
Posts: 67
Received 38 Likes on 23 Posts
Default

CETE install completed. I followed the instructions provided by Europrice but frankly the video I linked above is far more helpful. Install took me about 1.5 hrs with the lift. $90 for the lift rental is not bad.
It's pretty straight forward in retrospect. I took my time ensuring that the zip ties were neat and away from the exhaust, axle etc. I think I used like 25 zip ties so know that what is provided in the kit are not enough. I am not very mechanically inclined at all, so if I can do it anyone can, no joke. I will say that so far I like it but I am trying to understand the app and the profiles. Show mode is low but I wouldn't say is slammed to the ground like you see with aftermarket airbags. Have it set for -30 for now but will adjust once I swap wheels and test some driveways.


Old 04-03-2022, 03:08 PM
  #28  
AudiWorld Member
Thread Starter
 
Sam Adams's Avatar
 
Join Date: Mar 2003
Location: Bellevue, WA
Posts: 67
Received 38 Likes on 23 Posts
Default

Here's a little 10 minute "mod" for a lazy Sunday afternoon. I missed the sunglasses holder that I had on my MKIV Jetta, B5 S4 and even on my C7 A6. So I found this one on amazon.
Super cheap, easy install. There is no need for a grab handle on the drivers side and now I have a home for my shades. Apologies for the ridiculous large pics. I don't know how to change that.




The following 3 users liked this post by Sam Adams:
parkstr8 (01-03-2023), WausauS8 (04-12-2022), Zando504 (04-05-2022)
Old 04-12-2022, 10:56 AM
  #29  
AudiWorld Member
 
WausauS8's Avatar
 
Join Date: Feb 2013
Location: Wisco
Posts: 271
Received 26 Likes on 22 Posts
Default

Can you share the Amazon link? TIA
Old 04-12-2022, 11:39 AM
  #30  
AudiWorld Member
Thread Starter
 
Sam Adams's Avatar
 
Join Date: Mar 2003
Location: Bellevue, WA
Posts: 67
Received 38 Likes on 23 Posts
Default

PM Sent


Quick Reply: 2022 A6 Allroad Firmament Blue - Build thread



All times are GMT -8. The time now is 02:33 AM.