sutty279

Hi
I hit a curb hard with my driver side wheel in the snow. This caused the wheel to push back (not in middle of wheel arch). A garage replaced the wishbone and sorted tracking. However when I drove over 60 I would hear a pulsing noise from the driver side. I took it back and found drive crank was bent and had be replaced. It is still making noise but only between 65 and 70mph. Please help!

Vodka G

probably a bent rim...that will be my next guess

sutty279

They swapped the back wheels to the front to eliminate this. I'm beginning to suspect wheel bearing but the noise is not constantly present, only over a certain speed.

Vodka G

Is probably wheel bearing then, esp if it is only over a certain speed

engleg

When my wheel bearing started to fail I could hear the noise shortly after I started moving and could hear the unwanted noise at all speeds above that.
https://www.audiworld.com/forums/a6-...my-a6-2930946/

KevinGary

DanfZX14

I'll throw another vote in for the wheel bearing!

DB22