Maciej Swic

Hey, thanks for posting this.

I did this repair today and documented it with some photos to facilitate for others.

highmiles

Crap, and I just took it all apart to relube my blower motor. Could have killed two birds with one stone.

Rockwell

Hi New to the forum.. I have a 2004 Audi TT coupe Quattro
and the Cruise control does not work and I notice to fix online but I can't find the module... I have taken off the glove box found nothing and the panel by the driver and still not there. And yes it has cruise... Any idea please help...

highmiles

You have a different module, this repair doesn't apply. I have a different module as well.

John Downing

I have looked at the posts on how to fix the cc, but after I took out the cruise control unit I noticed that mine has a different number is 5GA006310-2 seen below. It has a different set up as far as the board so how do I fix the cruise control on this unit? Or other ideas on how to fix Cc. Thank you in advance.

Bartacus

Thx for this post, I had this problem on my 1999 A6 Quattro for over 2years and I ran across this and followed it and it worked great.

feroli

now it works fine

[IMG]C:\Users\pbell\audi\tempomat.jpg[/IMG]

feroli

[QUOTE=feroli;24459377]now it works fine



https://forums.audiworld.com/attachm...1&d=1372323503

A6-Santa

I've re soldered the above mentioned components and even replaced my relay without any luck.
Does anybody have a link to the pin-out of the cable that connects to the module? (I just find some VW info online that doesn't seem to apply)
I would like to check that the stalk is working correct.

Cheers, Mike

SloopJohnB@mac.com

The dealer would simply change out the cc module. Sometimes it's more than failed solder connections.
You might try a used cc module first.

I would also have started a new thread, reference the old one, but resurrecting a zombie thread often gets little response due to the time it takes to find the latest reply….