EPC still on, I've replaced ECU, throttle pedal, throttle body...keep getting code 18047
11-03-2006, 10:50 PM
#1
AudiWorld Member
Thread Starter
Join Date: Aug 2003
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
EPC still on, I've replaced ECU, throttle pedal, throttle body...keep getting code 18047
18047 - Accelerator Position Sensor 2 (G185): Implausible Signal
Think there is a shorted out wire between the ecu and the pedal, or between the ecu and the throttle body?
I ran a test with a scan tool, I'm getting full range with both the pedal sensors. But at the throttle body I'm only getting 32.5% throttle...anyone have any ideas? I'm going to check the wires tomorrow...
thanks!!!
Think there is a shorted out wire between the ecu and the pedal, or between the ecu and the throttle body?
I ran a test with a scan tool, I'm getting full range with both the pedal sensors. But at the throttle body I'm only getting 32.5% throttle...anyone have any ideas? I'm going to check the wires tomorrow...
thanks!!!
11-04-2006, 12:20 PM
#2
thorttle body adaptation?
This makes sense to try..<ul><li><a href="http://www.ross-tech.com/vag-com/cars/throttlebody.html">http://www.ross-tech.com/vag-com/cars/throttlebody.html</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
TwentyValveB5+S4
A4 (B5 Platform) Discussion
13
12-21-2006 02:24 PM
tybmw
S4 / RS4 (B5 Platform) Discussion
10
11-04-2006 01:16 PM
Robert F
A4 (B5 Platform) Discussion
3
05-08-2002 08:08 AM
