Has anyone been able to locate the proper bushing for the PSK sway bar?
#1
Has anyone been able to locate the proper bushing for the PSK sway bar?
I bored my 15mm bushing out, but I couldn't get it just the way I wanted it. There must be a better way.
#3
Absolutely! Thanks to brian 4.2 we know that the ....
<center><img src="http://pictureposter.audiworld.com/17396/bushings.jpg"></center><p>correct part number is 4B0-511-327. I ordered a PSK anti-sway bar about 2 weeks ago from Barry at Clair Parts. He checked the listed part number for the bushings for that bar as well as the regular anti-sway bar - they were listed as the same part# (8B0-511-327-D). I ordered the PSK bar and a set of bushings. Just after they arrived, brian4.2 posted the correct part#, so I called Barry back and he found that the new number had just shown up on his system. He rushed me a set of the new ones, they got here today. I'm going into the dealer to have them installed on Thursday.
Just in case there is any doubt, here is a picture of the standard bar's bushing (left) compared to the PSK bar's bushing. The standard one has a wasp-waist interior profile, the PSK one is straight through.
My thanks to brian4.2
- Tom
Just in case there is any doubt, here is a picture of the standard bar's bushing (left) compared to the PSK bar's bushing. The standard one has a wasp-waist interior profile, the PSK one is straight through.
My thanks to brian4.2
- Tom
Thread
Thread Starter
Forum
Replies
Last Post