Info on Carbon interior part
#1
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Hi to all
i have buy on eBay.de a full set of Carbon set for an A6.
This set is finished in Bergamo color.
The piece of interior relatively to the tiptronic, is not as my tiptronic, because it is extract from an A6 whit a car radio and multitronic. Now the question:
This piece of carbon object is exist for tiptronic like mine ??
My tip is made whit PRND432 and +- sign.
If exist, you know the Audi code ?
Many, many tnx in advance for your patience.
Claudio
i have buy on eBay.de a full set of Carbon set for an A6.
This set is finished in Bergamo color.
The piece of interior relatively to the tiptronic, is not as my tiptronic, because it is extract from an A6 whit a car radio and multitronic. Now the question:
This piece of carbon object is exist for tiptronic like mine ??
My tip is made whit PRND432 and +- sign.
If exist, you know the Audi code ?
Many, many tnx in advance for your patience.
Claudio
#3
AudiWorld Expert
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
when the tiptronic consisted of the PRNDS instead of what you have. However, I sent mine out to get the hole milled out for the PRND432, and the end result was...
<img src="http://pictureposter.audiworld.com/69482/dsc00109.jpg">
carbonLORD sourced a place in the midwest that will mill out the hole in the trim piece that you have to fit your car. You have to send him both the carbon fiber piece as well as the existing wood trim, so he can make sure that he cuts it porperly. Takes about a week or so, not including shipping (not a priority job for this guy, but he does nice work).
Anyway, if you want the info, shoot me an e-mail.
FYI - That is the RS6 shift **** (I got from epimorters.com) and I brushed the finish for the metal shift bezel.
<img src="http://pictureposter.audiworld.com/69482/dsc00109.jpg">
carbonLORD sourced a place in the midwest that will mill out the hole in the trim piece that you have to fit your car. You have to send him both the carbon fiber piece as well as the existing wood trim, so he can make sure that he cuts it porperly. Takes about a week or so, not including shipping (not a priority job for this guy, but he does nice work).
Anyway, if you want the info, shoot me an e-mail.
FYI - That is the RS6 shift **** (I got from epimorters.com) and I brushed the finish for the metal shift bezel.
Thread
Thread Starter
Forum
Replies
Last Post
lishuowei
Audi A5 / S5 / RS5 Coupe & Cabrio (B9)
3
08-22-2019 06:39 AM
CraigWS
Want To Buy - Archive (NO NEW POSTS HERE)
0
02-18-2018 05:19 PM
CrazyAudiDriver
Parts For Sale - Archive (NO NEW POSTS HERE)
1
08-24-2017 06:59 AM
Idoktr
Want To Buy - Archive (NO NEW POSTS HERE)
0
04-02-2017 12:27 PM
Richard Reventlow
S4 / RS4 (B5 Platform) Discussion
4
08-22-2001 06:02 PM