Like it ??? The new face of my A6 2.8 '98. Many photos...
#1
Like it ??? The new face of my A6 2.8 '98. Many photos...
Hi to all,
just retired now from my car stylist
Sorry for the upper grill, is terrible but in RS6 look for this body, nothing is too low to describe the situation. I hope in LLTek for a solution.
The headlight are AllRoad parts, with modified BiXenon block, original from the A6 facelift post 2001, and electrical contact and motor from original alogen headlight. The result is an interchangeable perfect headlight, mechanical and electrical.
The badlook is made aluminium-on-aluminium and the air hole are made from CHD Tuning in Italy.
The TT gasoline close is a real great object, tnx to eBay.de..
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0070.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0071.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0072.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0073.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0074.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0075.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0076.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0077.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0078.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0079.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0080.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0081.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0082.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0083.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0084.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0085.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0087.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0088.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0089.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0091.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0092.jpg">
Any comment ?? ))
Yes the wheels are a bit small, but in Italy change this measure after purchase the car is simply impossible....
Tnx to all and if you know some people at LLTek, tell you that i'm in a bad situation... )
just retired now from my car stylist
Sorry for the upper grill, is terrible but in RS6 look for this body, nothing is too low to describe the situation. I hope in LLTek for a solution.
The headlight are AllRoad parts, with modified BiXenon block, original from the A6 facelift post 2001, and electrical contact and motor from original alogen headlight. The result is an interchangeable perfect headlight, mechanical and electrical.
The badlook is made aluminium-on-aluminium and the air hole are made from CHD Tuning in Italy.
The TT gasoline close is a real great object, tnx to eBay.de..
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0070.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0071.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0072.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0073.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0074.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0075.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0076.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0077.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0078.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0079.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0080.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0081.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0082.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0083.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0084.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0085.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0087.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0088.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0089.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0091.jpg">
<img src="http://www.claz.it/audi/estetica/badlook/DSCF0092.jpg">
Any comment ?? ))
Yes the wheels are a bit small, but in Italy change this measure after purchase the car is simply impossible....
Tnx to all and if you know some people at LLTek, tell you that i'm in a bad situation... )
#2
I like the eyebrow effect over the headlights
But I'm not a big fan of the venting through the hood. The Allroad headlights look great! The TT fuel filler cap is not my style either.
In the end, that's a bold statement on the C5 body... nice job.
In the end, that's a bold statement on the C5 body... nice job.
#5
Kudo's to your body shop for this level of work.
That is the most interesting set up I have seen in a long time.
What do you do with the hood when it rains? Where does the water drain?
The hood is interesting, did they add material to overlap the headlights?
A very interesting set up indeed. Very interesting.
What do you do with the hood when it rains? Where does the water drain?
The hood is interesting, did they add material to overlap the headlights?
A very interesting set up indeed. Very interesting.
Trending Topics
#8
Yeah, the rain is a problem for now...
The rain drop on the plastic hood of the V6 motor, not directly on the center top.
The next work is remake the pastic original hood in carbon, with a single part and not 3 separate object. This is a simple solution to the problem. Other than the benefit of the hood work, fade away.
The eyebrow is made in alu-on-alu. For this work was used an epoxide that guarantee 100Kg for 1 cm2.
Is a gret product and was made a perfect integration with the original style line.
The bumper is (mhmm.. what is the name?) fiberglass !!
You have made a very large and great work, not me... )
Tnx to all !!
The next work is remake the pastic original hood in carbon, with a single part and not 3 separate object. This is a simple solution to the problem. Other than the benefit of the hood work, fade away.
The eyebrow is made in alu-on-alu. For this work was used an epoxide that guarantee 100Kg for 1 cm2.
Is a gret product and was made a perfect integration with the original style line.
The bumper is (mhmm.. what is the name?) fiberglass !!
You have made a very large and great work, not me... )
Tnx to all !!