4Driver4

This is a new one on me. The car has no turn signals, no high beams at any time, and the fog lights (front and rear) are non-functional. 4-way hazard flashers work fine. No power the fuses for the high beams and the fogs.

Kris Hansen

no highs at flash to pass? Load reduction relay?

Boston Driver

If it was just the high beams and fogs, I'd say maybe the headlight switch, but the turn signals are unrelated to that switch. If it was just the high beams and the turn signal, I'd guess the signal stalk, but the fogs are unrealated to the stalk. I'd also guess the fog relay, but I do not think that is related to the high beams or the turn signals.

Odd...

4Driver4

No flash to pass. AC, wipers, etc all are working as normal.

I'm not sure how much that relay does; it might be a double pole or something. I'll look into it.

4Driver4

Cruise isn't working either, but that may predate this issue.

4Driver4

AArrggg! I hate Bentley Publishers. eBahn Reader errors out when I try to view wiring diagram.

Kris Hansen

try this one out...


http://audi.kris-hansen.com/bentley/audi.c5.wd.25.pdf

4Driver4

Oye. That's gonna keep me busy for a while - lol Huge thanks!

Kris Hansen

No sweat. Start around page 16..

4Driver4

Been poking through it (that's why it took so long to respond). I think I might know the answer.

To reinstall the cluster, I telescoped the steering wheel all the way out toward me. If I unplugged the wires to the turn signal stalk, that might be the issue. Will report back tonight.