Pics of Door Blades, Drilled Rotors, etc
11-06-2006, 01:52 PM
#1
Member
Thread Starter
Join Date: Mar 2005
Posts: 2,271
Likes: 0
Received 0 Likes
on
0 Posts
Pics of Door Blades, Drilled Rotors, etc
<img src="http://pictureposter.audiworld.com/90120/blades1.jpg">
Silver 4.2 Door blades.
two screws are still stuck on the passanger "Blade" but I left it, dont think the blades will slide out since that door is closed most of the time
<img src="http://pictureposter.audiworld.com/90120/blades2.jpg">
Rotors and Painted Calipers with Audi logo from Ebay
<img src="http://pictureposter.audiworld.com/90120/rotors_left.jpg">
Driver side
<img src="http://pictureposter.audiworld.com/90120/rotors_right.jpg">
Passanger side
Zimmerman Rotors at last
<img src="http://pictureposter.audiworld.com/90120/rotors.jpg">
as you can see they have the same directional pattern.
I hope it does not mess anything up on my car.
I called www.sasponline.com and talked to some guy. He said they sold many of those and I'm the first to complain.
Should I be OK with the rotors????
Silver 4.2 Door blades.
two screws are still stuck on the passanger "Blade" but I left it, dont think the blades will slide out since that door is closed most of the time
<img src="http://pictureposter.audiworld.com/90120/blades2.jpg">
Rotors and Painted Calipers with Audi logo from Ebay
<img src="http://pictureposter.audiworld.com/90120/rotors_left.jpg">
Driver side
<img src="http://pictureposter.audiworld.com/90120/rotors_right.jpg">
Passanger side
Zimmerman Rotors at last
<img src="http://pictureposter.audiworld.com/90120/rotors.jpg">
as you can see they have the same directional pattern.
I hope it does not mess anything up on my car.
I called www.sasponline.com and talked to some guy. He said they sold many of those and I'm the first to complain.
Should I be OK with the rotors????
11-06-2006, 01:56 PM
#2
AudiWorld Super User
Join Date: May 2004
Location: Mansfield, MA
Posts: 11,474
Likes: 0
Received 0 Likes
on
0 Posts
Very nice. Clearing the amber inserts in your headlight housings would really complete the look.
Well done. Perhaps one of the nicest looking C5 3.0's that I've seen on this board.
11-06-2006, 01:56 PM
#3
Audiworld Junior Member
Join Date: Apr 2006
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
Nice...
... The rotors will be just fine.
The only thing you need now are the little grey plastic caps that go over your lug bolts. Cost about $0.50 per at the dealer. Well that and brushed aluminum mirrors
Is that the stock exhaust for the 3.0?
The only thing you need now are the little grey plastic caps that go over your lug bolts. Cost about $0.50 per at the dealer. Well that and brushed aluminum mirrors
Is that the stock exhaust for the 3.0?
11-06-2006, 01:58 PM
#4
AudiWorld Senior Member
Join Date: Jan 2001
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
You wont have any problems with the rotors...
..assuming the vanes inside them are non-directional. Most OEM rotors are non-direction anyhow, so it wont matter. And having the drilled holes being as they are wont hurt anything. Matter of fact I bet it'll have 99% the same 'cooling' as if they went the "correct" way. So you're prob all good.
BTW, car looks wicked nice... dig it!
BTW, car looks wicked nice... dig it!
Trending Topics
11-06-2006, 02:14 PM
#9
Member
Thread Starter
Join Date: Mar 2005
Posts: 2,271
Likes: 0
Received 0 Likes
on
0 Posts
Very satisfied with rotors
my steering wheel used to shake when braking, now all that is gone.
I was just worried because of the direction of the holes in the rotors.
Last thing to do this week is the road forced balance and I should be ok.
I was just worried because of the direction of the holes in the rotors.
Last thing to do this week is the road forced balance and I should be ok.
