R2.7TA6

How is everyone keeping the suctions cups attached to windshield? NO matter what, every few weeks they loose their grip and fall, its getting old, any suggestions? I have two sets of new ones coming from Escort.

brat2.ua

Seriously! Not the nasty way though! hahaah :-D

otherwise just put water on them.

paulroad

I use velcro; one strip on the top of the Rearview mirror, one strip on the bottom of the Radar unit. Fits like a glove.

Press

i use them...no problems....

SNAFU 4

and that really helps.

Boston Driver

once in a while, whenit gets REALLY cold, they might lose their suction and the detector may fall, so I typically take it off after I drive so it is not hanging there, ro worse, fall and hit/damage something.

John/Jmess5

I've replaced them w/bigger ones from a craft store. But, I think they all have a life-span.

Rocky-in-Connecticut

try cleaning your windshield

néné

While rear view mirror is out of the way, I use a little saliva on the suction cups, and put the Valentine 1 in place. Re-adjust mirror such that it provides some help holding the Valentine 1 from the bottom.
I used a small strip of black felt type tape such that the plastics don't rub together and make noise. Good since I put it in place.

AudiForYou's 2.7T

If they don't stick forever after that, they're probably worn and should be replaced.