Backup Camera Inop & Beep Selecting Reverse
#1
Backup Camera Inop & Beep Selecting Reverse
The backup camera syatem has stopped working on my 2007 A6.
When I select reverse there's one short beep with no other warning indication, and the screen does not change to a camera image but just stays where it is. The backup sensors still work and beep as they should when I get close to something, but the single beep when selecting reverse is new and coincides with the inop camera system.
I've made sure the trunk lid is closed and have tried rebooting the MMI, but the problem persists.
Any thoughts?
Thanks.
Joe
When I select reverse there's one short beep with no other warning indication, and the screen does not change to a camera image but just stays where it is. The backup sensors still work and beep as they should when I get close to something, but the single beep when selecting reverse is new and coincides with the inop camera system.
I've made sure the trunk lid is closed and have tried rebooting the MMI, but the problem persists.
Any thoughts?
Thanks.
Joe
#2
The backup camera syatem has stopped working on my 2007 A6.
When I select reverse there's one short beep with no other warning indication, and the screen does not change to a camera image but just stays where it is. The backup sensors still work and beep as they should when I get close to something, but the single beep when selecting reverse is new and coincides with the inop camera system.
I've made sure the trunk lid is closed and have tried rebooting the MMI, but the problem persists.
Any thoughts?
Thanks.
Joe
When I select reverse there's one short beep with no other warning indication, and the screen does not change to a camera image but just stays where it is. The backup sensors still work and beep as they should when I get close to something, but the single beep when selecting reverse is new and coincides with the inop camera system.
I've made sure the trunk lid is closed and have tried rebooting the MMI, but the problem persists.
Any thoughts?
Thanks.
Joe
#3
When it was working right there was no beep at all when selecting or passing Reverse. The only beeps were the ones from the distance sensors when I got close to something.
#4
Thread
Thread Starter
Forum
Replies
Last Post
phuver
A6 / S6 (C6 Platform) Discussion
9
03-19-2017 09:58 PM
phuver
Audio, Video and Security Discussion
0
02-08-2017 05:03 AM