ramx2

Hello,

Yesterday I took the plunge and did the firmware upgrade for the MMI basic plus..

While installing the firmware an error appeared IDC/IDC/Bolo 290->330 ErrorCode: 0x516

The IDC is the CD-Changer I assume but after completing the whole process I can see that the update worked not on all MOST devices:


\\Before\\
Info:

Interfacebox:
SW Rel: C6STdplus_0040
HW Rel: H35
Date: 24.08.2004
------------------
CD-Changer:
SW Rel: 0340
HW Rel: H44
Date: 21.11.2003
------------------
Handyvorb2:
SW Rel: 0120
HW Rel: H10
Date: 09.06.2004
-------------------
Amp-ASK
SW Rel: 0270
HW Rel: H09
Date: 07.04.2004
--------------------
Gateway:
SW Rel: 0030
HW Rel: H09
Date: 31.03.2004
---------------------

\\After\\
Info:

Interfacebox:
SW Rel: C6STdplus_0370
HW Rel: H35
Date: 24.08.2004
------------------
CD-Changer:
SW Rel: 0470
HW Rel: H44
Date: 04.08.2005
------------------
Handyvorb2:
SW Rel: 0700
HW Rel: H10
Date: 02.0202006
-------------------
Amp-ASK
SW Rel: 0350
HW Rel: H09
Date: 04.01.2006
--------------------
Gateway:
SW Rel: 0030
HW Rel: H09
Date: 31.03.2004
---------------------

After the firmware update now my CD-Changer skips.. What could be the reason and how should I fix it ?

Help Appreciated,
Regards,

KevinGary

Run the update a second time.

ramx2

Did that, the list shows <N> means there's no need to update :S..

eazy211187

Reset the MMI, once or twice

ramx2

I'll try reseting the MMI tonight, but do you think the CD-Changer is on Component protection mode ?

eazy211187

I had similar issue like that when I did the software update. The fix was resetting the MMI. I also unplugged and replugged both the cd changer power supply and the optical cable. Worked for me.

ramx2

I did reset the MMI same skips occurs, I even disconnected the fuse nothing changed at all..

thank you for the replies..