DIY sway bar links?
07-29-2010, 04:28 AM
#1
AudiWorld Senior Member
Thread Starter
Join Date: Oct 2005
Location: Northern NJ
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
DIY sway bar links?
Anyone have a write up or know the difficulty of changing the sway bar links ..?
Is it a DIY?
What is the AVG quotes on the job..
Any help please..
Is it a DIY?
What is the AVG quotes on the job..
Any help please..
08-02-2010, 06:38 AM
#3
AudiWorld Member
Join Date: Dec 2000
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
08-02-2010, 02:19 PM
#4
AudiWorld Senior Member
The place where the sway bar meets the end links is very tight. I had to go out and buy flexi-head ratcheting wrench (http://www.sears.com/shc/s/p_10153_1...4&blockType=G4) - otherwise for me it was not possible to screw/unscrew the endlinks. From what I remember, you need a 5/8th wrench. I'd think that you have to remove the swap bar while removing the end links.
08-07-2010, 06:51 AM
#5
AudiWorld Senior Member
Thread Starter
Join Date: Oct 2005
Location: Northern NJ
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
The place where the sway bar meets the end links is very tight. I had to go out and buy flexi-head ratcheting wrench (http://www.sears.com/shc/s/p_10153_1...4&blockType=G4) - otherwise for me it was not possible to screw/unscrew the endlinks. From what I remember, you need a 5/8th wrench. I'd think that you have to remove the swap bar while removing the end links.
Thread
Thread Starter
Forum
Replies
Last Post
Sourdough Josh
A4 (B6 Platform) Discussion
0
09-01-2005 08:21 AM
emmett03
Audi Original "S" Cars
3
02-25-2005 02:40 PM
The Devil
Audi 90 / 80 / Coupe quattro / Cabriolet
6
04-28-2004 10:52 AM
cpayne
Audi Original "S" Cars
3
02-27-2003 07:30 AM
