Has anyone "VAG'd" a 2005 yet?
04-15-2005, 06:09 PM
#1
AudiWorld Member
Thread Starter
Join Date: Mar 2000
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone "VAG'd" a 2005 yet?
I'd be interested to know what was is possible to change, especially if the seatbelt annoyer could be disabled, it's super annoying when I want to sit in the car and mess with stuff. Also wonder if this would be the way to turn off the "lawyer screen" in the MMI. Somehow I'm going to guess that VAG may not do this and it may require true MMI software hacks... Many of the BMW forums talk about doing this kind of stuff so hopefully we can figure it out soon as well.
04-15-2005, 11:46 PM
#2
AudiWorld Senior Member
Join Date: Jun 2001
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
I changed the seatbelt "gong" on mine.
There are 3 options: 90 seconds, 5 seconds or disbled.
I have chosen the 5 second option on mine. It's not as annoying as the standard 90 seconds.
The lawyer screen doesn't exist on European cars, so that has never been a problem for me. I haven't been able to find any info on it, so I'm afraid that it might be hard coded in the MMI system.
Check this page for info:<ul><li><a href="http://de.openobd.org/audi/a6_4f.htm">OBD codes for the C6</a></li></ul>
I have chosen the 5 second option on mine. It's not as annoying as the standard 90 seconds.
The lawyer screen doesn't exist on European cars, so that has never been a problem for me. I haven't been able to find any info on it, so I'm afraid that it might be hard coded in the MMI system.
Check this page for info:<ul><li><a href="http://de.openobd.org/audi/a6_4f.htm">OBD codes for the C6</a></li></ul>
04-16-2005, 12:41 AM
#3
Very useful, Kitora! Primitive translation follows...
{AUDI A6 (4F)} in the AUDI A6 (4F) 2 communication possibilities for the eigendiagnose are used, on the one hand are also further possible a diagnosis over the used k-line, however limits to the engine expensive equipment and autom. Transmission. On the other hand all controllers are accessible over the CAN bus diagnosis.
The eigendiagnose should take place with an CAN able test equipment, thus can all controllers be addressed.
The following controllers are already here contained:
- longitudinal control
- Airbag
- trailer recognition
- brake electronics
- indicator/control unit (in front)
- automatic transmission
- electrical system I
- electrical system II
- a park assistance
- parking brake
- combination instrument
- comfort system
- steering wheel electronics
- shining width adjustment
- engine electronics
- level control
- tire pressure monitoring
- satellite radio
- telephone/mobile phone preparation
- door expensive devices
- entrance/starting authorization
- auxiliary/condition heating
{Airbag}
Controller coding
STG 15 (Airbag) select
STG coding - > function 07
Note: Due to the large number of possible codings you ask please a specific inquiry with part number and appropriate index by email.
Controller adjustment
STG 15 (Airbag) select
STG adjustment - > function 10
Over the adjustment the Airbageinheiten is activated, and/or deactivated, depending upon motor vehicle type and/or model must be available not all channels.
0 - activates
1 - deactivates
- > channel 01 (AirbagBeifahrerseite)
- > channel 02 (Airbagdriver's side)
- > channel 03 (SeitenairbagBeifahrerseite)
- > channel 04 (Seitenairbagdriver's side)
- > channel 05 (belt-tautBeifahrerseite)
- > channel 06 (belt-tautdriver's side)
{trailer recognition}
Controller coding
STG 69 (trailer recognition) select
STG coding - > function 07
0000?xx: Handwheel
0 - without serving aster
3 - Handwheel for mechanical swiveling function
0000x?x: Trailer connector set
0 - without mechanical swiveling function
3 - mechanical swiveling function
0000xx?: Land selection
1 - Remainder of the world (RdW)
2 - The USA
3 - Australia
{indicator/control unit (in front)}
Controller coding
STG 07 (indicator/control unit in front) select
STG coding - > function 07
?xxxxx: Vehicle configuration
+1 - Driver information system (FIS)
+2 - Ausfuerung South America
+4 - 4-Tasten-Bedienteil
x?xxxx: Vehicle configuration
+1 - internal amplifier (sound system)
+2 - Karosserievariante "Avant"
+4 - Leather equipment
xx?xxx: Vehicle configuration
+1 - Seat position in front
+2 - Seat position in the back
+4 - Right steering wheel
xxx?xx: Vehicle configuration
+1 - A park assistance in the back
+2 - Refendruck control system
+4 - Pneumatic cushioning
xxxx?x: Vehicle configuration
+1 - Adaptive Cruise Control (ACC)
+2 - Ambientebeleuchtung
+4 - A park assistance in front
xxxxx?: Land coding
1 - German
2 - English (GB)
3 - English (US)
4 - Spanish
5 - Italian
6 - French
7 - Portuguese
8 - reserves
9 - Chinese
Controller adjustment
STG 07 (indicator/control unit in front) select
STG adjustment - > function 10
- > channel 001 (mm iv-building list)
Sheeting list for MMI functionality CAR menu.
+00001 - adaptive cruise control (PR-8T4)
+00002 - Ambientenbeleuchtung (PR-QQ1)
+00004 - acoustic parking system in front (PR-7X2)
+00008 - acoustic parking system in the back (PR-7X1/7X2)
+00016 - Tire pressure control system (PR-7K3/7K4/7K5)
+00032 - Pushing/issuing roof (PR-3FE/3FR)
+00064 - adaptive air suspension (PR-1BK)
+00256 - Rain sensor (PR-8N3)
+00512 - one touch MEMORY (PR-4K5/4K6)
+01024 - Seat position in front (PR-3PN)
+02048 - Seat position in the back (PR-5Z1)
+04096 - Multi-function steering wheel (e.g. PR-1XW)
+16384 - Telematics (emergency call system/PR-9ZH/9ZS/9ZV)
- > channel 002 (MMI Anzeigeoptionen)
Indicator option for MMI functionality CAR menu.
?xx: Karosserievariante
0 - Sedan (PR-4F0)
1 - Avant (PR-4F0 K8D)
x?x: Chassis number
0 - Chassis number (VIN) do not indicate
1 - Chassis number (VIN) indicate
xx?: Karosserievariante
0 - Right steering wheel (PR-L0R)
1 - Link steering wheel (PR-L0L)
- > channel 003 (author turn value)
Time interval for the automatic reasoning of MMI Hinweismenues.
- > channel 004 (speed threshold)
Speed, starting from which the functions Car menu is switched off.
- > channel 005 (speed delta)
Delta, starting from that the functions Car menu and training procedure one touch of the MEMORY to be again activated (e.g. speed threshold = 15 km/h, speed delta = 5 km/h - > disconnection with 15 Km/h, activation with 10 km/h).
- > channel 006 (MMI hunting time)
Time interval between switching off and automatic driving of the MMI down.
- > channel 011 (MMI function range)
Additional MMI functions
0 - Log book not available
1 - Log book available (standard)
- > channel 012 (type of telephone)
0 - no telephone/telematics
2 - Mobile phone preparation
4 - Telematics
- > Kanel 064 (brightness search lighting)
Change brightness the operating sector search lighting (changes in the controller are not stored).
- > Kanel 065 (brightness function lighting)
Change brightness the operating sector function lighting (changes in the controller are not stored).
- > Kanel 066 (MMI display)
MMI display in-/-switch off.
- > channel 067 (brightness display lighting)
Change brightness MMI display lighting (changes in the controller are not stored).
- > channel 068 (MMI test pattern)
Test pattern on that MMI display spend.
0 - no test pattern
1 - Red
2 - Green
3 - Blue
4 - White
5 - Black
6- Chessboard (black and white)
7 - Chessboard (inverse)
8 - 64 gray tones (vertical bars)
- > channel 096 (transmitting power)
Reduces the transmitting power of the optical bus by half (changes in the controller are not stored).
- > channel 111 (MMI system RESET)
To activate MMI a RESET accomplished over again coded and/or adapted values.
{electrical system I}
Controller coding
STG 09 (electrical system I) select
STG coding - > function 07
?xxxxx: Steering column MEMORY
0 - without steering column MEMORY and/or manual steering column
1 - with steering column MEMORY
x?xxxx: Floor space lighting
0 - Floor space lighting as lamp blocks
1 - Floor space lighting as LED blocks
xx?xxx: Headlight
0 - Halogen headlight without SRA
1 - Halogen headlight with SRA
2 - Bi-xenon-headlight
3 - Bi-xenon-headlight with AFS
xxx?xx: Headlight
0 - without automatic headlight
1 - with automatic headlight with sensor rain/photosensor
xxxx?x: Day headlight
0 - without day headlight
1 - with day headlight not selectable over MMI
2 - with day headlight selectable over MMI
xxxxx?: Land variant
1 - Remainder of the world (RdW)
2 - North countries (Finland, Sweden, Norway, Denmark)
3 - THE USA (US)
4 - Canada (CDN)
{electrical system II}
Controller coding
STG 4F (electrical system II) select
STG coding - > function 07
x?xxx: Glove compartment unblocking
1 - actively (standard)
xx?xx: Inclination sensor
0 - does not block (PR-7AA)
1 - blocks (PR-7AL/7AN)
xxx?x: Sun roof
0 - does not block (PR-3FA/3FL)
1 - blocks (PR-3FE/3FR)
?xxx?: Engine variant
0xxx3 - 6-Zylinder diesel engine 3.0l (PR-T41/1N3)
1xxx4 - 8-Zylinder petrol engine 4.2l (PR-T79/T8T/1N3)
0xxx4 - Other basic engine (PR-TB3/T14/T15/T44/T45/T61/T9G/TQ0/TA1/1N3)
Controller adjustment
STG 4F (electrical system II) select
STG Security ACCESS - > function 16
Before the adjustments to be accomplished to be able ACCESS an appropriate Login must be made by the Security. Logincode: 12151
STG adjustment - > function 10
- > channel 1 (inclination sensor threshold)
Alarm threshold in X - and Y direction (default value: 80)
- > channel 2 (heading for time Handschuhksten)
Activaton time for the glove specialized opening (default value: 100)
- > channel 3 (play protection counter)
Time after that is reduced the play protection counter around 1 (default value: 20)
- > channel 4 (play protection counters)
Threshold for the play protection counter, starting from which a control is prevented (default value: 20)
{parking brake}
Controller coding
STG 53 (parking brake) select
STG coding - > function 07
000??xx: Engine variant
01 - 2,0l TDI
02 - 2,5l TDI
03 - 3,0l TDI
04 - 4,0l TDI
05 - 2,7l TDI
10 - 2,0l T FSI
20 - 2,4l MPI
30 - 2,8l FSI
40 - 3,0l MPI
50 - 3,2l FSI
60 - 4,2l MPI
70 - 4,2l FSI
000xx?x: Transmission variant
1 - Transmission ML310
2 - Automat AL420
3 - Multitronic VL300
4 - Multitronic VL380
5 - Transmission ML450
6 - Automat AL600
7 - Transmission ML350
000xxx?: Land variant
1 - Remainder of the world (RDW)
2 - USA/Canada
3 - Japan
Controller basic adjustment
STG 53 (parking brake) select
STG basic adjustment - > function 04
Group of measured values of 006 (brakes close)
Group of measured values of 007 (brakes open)
It lasts approx.. 5 seconds, until the brakes are completely opened.
Group of measured values of 010 (functional test)
The brake opens and closes 3 time.
Group of measured values of 020 (angle of inclination sensor calibrate)
After approx.. 2 seconds without movement the value is stored, after approx.. the basic adjustment is terminated 12 seconds.
{combination instrument}
Controller coding
STG 17 (combination instrument) select
STG coding - > function 07
???xxx: Extra options and optional extras
+000 - no extra options
+001 - second tank characteristic and/or Quattrocodierung
+002 - without FIS (Fof ahrerinformationssystem)
+004 - Clutch vehicle (no mechanism)
+008 - second pair of tire extent
+016 - Tire pressure control
+032 - Pneumatic cushioning (adaptive air suspension)
+064 - AFS (dyn. LWR with Advanced Frontlighting System)
+128 - ACC (Adaptive Cruse Control)
+256 - 70-Liter tank (only front wheel drive)
xx?xx: Land variant
0 - Germany (DE)
1 - Remainder of the world link steering wheel (RdW)
2 - THE USA (US)
3 - Canada (CDN)
4 - Great Britain (GB)
5 - Japan link steering wheel (JP)
6 - Saudi Arabia (SA)
7 - Australia (OUT)
8 - Remainder of the world right steering wheel (RdW)
9 - Japan right steering wheel (JP)
xxx?x: Belt warning
0 no belt warning
1 Belt warning Europe NCAP (optical durable warning, acoustic warning for 91 seconds actively)
2 Belt warning USA/Canada old
(optical and acoustic warning for 6 seconds)
3 Belt warning USA/Canada NAR again
(optical durable warning, acoustic warning every 30 seconds)
4 Belt warning Europe NCAP (including front seat passengers)
(optical durable warning, acoustic warning for 91 seconds actively)
5 Belt warning USA/Canada old (including front seat passengers) (optical and acoustic warning for 6 seconds)
6 Belt warning USA/Canada NAR again (including front seat passengers) (optical durable warning, acoustic warning every 30 seconds)
xxxx?: Lighting options
0 - Pointer and scales OUT (Kl.15 & Kl.58 out)
1 - Pointer, scales OUT (Kl.15 & Kl.58 out)
2 - Pointer OUT, scales (Kl.15 & Kl.58 out)
3 - Pointer and scales (2nd characteristic - Kl.15 & Kl.58 out)
Controller adjustment
STG 17 (combination instrument) select
STG adjustment - > function 10
Notes:
- there are in the A6 (4F) 2 different countries groupings in the case of the maintenance interval attitudes to carries comes.
- the maintenance interval channels are to be adapted in the following order: 45>43>42>44>49 and/or. 45>42>43>49>44.
Countries group 1 (flexible wartungsintervall): Germany, Belgium, Denmark, Finland, France, Greece, Great Britain, Ireland, Iceland, Italy, Kanari islands, Luxembourg, the Netherlands, Norway, Malta, Austria, Portugal, Sweden, Switzerland/light stone, Spanien/Andorra, Tschechien, Cyprus
Countries group 2 (firm wartungsintervall): Canada and the USA, Poland, Turkey, New Zealand, Australia, China, GUS (without the Baltic, Ukraine, white Russia), special requirement South America (without Argentina, Brazil, Chile), Romania, Chile, special requirement the Near East (Jordan, Syria, Lebanon), special requirement the middle east (Iraq, Afganistan), special requirement Africa (without north/South Africa), South Africa, special requirement North Africa (Egypt, Algeria, Libya, Morocco, Tunesien), special requirements Brunei, Albania, Macedonia, Argentina, Estland, Litauen, Belarus (white Russia), Bahrain, Kuwait, Qatar, Dubai
- > channel 02 (service interval announcement)
To "00000" puts back enters and the value stores.
- > channel 03 (consumption gauge)
The base value is 100 now can it the whole in 1% steps adjust, the respective maximum values is 85 (%) and/or. 115 (%).
- > channel 09 (odometers)
The values give the distance to in the km counter are later indicated (e.g. 11356 for km conditions of 113.560km).
Before the combination instrument the new km conditions accepted must take place a Login with "13861 ".
- > channel 19 (radio clock)
The adjustment of the synchronisation duration for the radio clock takes place in minutes, to which value 0 does not correspond the condition a radio clock blocked.
Range of values: 0 - 50 minutes
- > channel 29 (tank giver characteristic 2) (only Quattro)
The base value is 128 now can it in 1er steps adjust, this corresponds 1/4 litre. The respective maximum values are 120 and/or. 136. The translation of the tank giver characteristic is made by the whole range.
- > channel 30 (tank giver characteristic 1)
The base value is 128 now can it in 1er steps adjust, this corresponds 1/4 litre. The respective maximum values are 120 and/or. 136. The translation of the tank giver characteristic is made by the whole range.
- > channel 31 (wet measuring)
Adjustment of the level of fuel in the tank with first filling at the volume. This value serves for the correction, after first switches on for the ignition corrects the combination instrument the tank giver resistance on the indication of litre angebene in this channel.
- > channel 32 (dead volumes)
Adjustment of the volume not seized by the tank giver. This must take place before the Erstbefuellung in the channel 31.
- > channel 33 (full measuring)
Adjustment of the upper half of the tank giver characteristic, this is stretched and/or shrinks. The base value is 128 and can in 1 ohm steps between 112 and 144 be veriiert. In order to start the correction is as the first adjustment value 65535 to be entered.
- > channel 35 (adjustment of the number of revolutions threshold)
The adjustment value 0 corresponds to an oil pressure warning stopped by the factory, if the oil pressure falls at a number of revolutions of 1500 1/min under 1,2 bar. The adjustment can take place in 250er steps (0 - 1000 ).
0000 - 1000 U/min
0250 - 1750 U/min
0500 - 2000 U/min
0750 - 2250 U/min
1000 - 2500 U/min
- > channel 38 (oil min warning)
Adjustment of the oil min warning with low oil level. Before the attitude a Login with 13861 must take place.
0 - deactivates
1 - activates
- > channel 39 (TOG sensor)
Over this channel festeglegt whether the temperature and oil level giver(TOG) in the combination instrument is blocked. Before the attitude a Login with 13861 must take place.
0 - deactivated (in the combination instrument does not block)
1 - activated (in the combination instrument blocks)
- > channel 40 (driven way STR since last service)
The input of the respective desired value is only in steps from 100 km possible, thus effected also the announcement in the display.
- > channel 41 (time since last service)
The input of the respective desired value is only in steps from days possible, thus effected also the announcement in the display in days.
- > channel 42 (minimum km road performance)
The indication takes place in 100km (150x100=15.000km).
080 - firm wartungsintervall (8,000 km/5,000 miles)
150 - flexible wartungsintervall (15.000km)
- > channel 43 (maximum km road performance)
The indication takes place in 100km (e.g. 150x100=15.000km).
080 - firm wartungsintervall (8,000 km/5,000 miles)
300 - flexible wartungsintervall (30,000 km/19,000 miles)
-> channel 44 (maximum time interval)
The indication takes place in days.
365 - firm wartungsintervall (group of 2 countries)
730 - flexible wartungsintervall (group 1 countries)
- > channel 45 (oil quality)
1 - firm wartungsintervall (group of 2 countries)
2 - flexible wartungsintervall (group 1 countries)
- > channel 46 (total consumption quantity) (only gasoline)
The value indicated in litres represents not actual consumption, but an arithmetic procedure for the service announcement from different engine data and run achievement.
- > channel 47 (soot entry) (only Diesel)
The indicated value represents a reference value, for the service announcement. The indicated value is an arithmetic procedure for the soot portion in the engine oil, related to a distance of 100 km.
- > channel 48 (thermal load) (only Diesel)
The indicated value represents a reference value, for the service announcement. The indicated value is an arithmetic procedure for the thermal load in the engine oil, related to a distance of 100 km.
- > channel 49 (minimum time interval)
The indication of the time takes place in days.
365 - firm wartungsintervall (all group of 2 countries)
365 - flexible wartungsintervall (gasoline engines - group 1 countries)
730 - flexible wartungsintervall (Diesel engines - group 1 countries)
{comfort system}
Controller coding
STG 46 (comfort system) select
STG coding - > function 07
+000001 - Standard (always active)
+000002 - 10 Tamperalarme (GB/Irland, PR-B09)
+000004 - Lockcylinder unlocks ZV electrically (PR-7AA/8AU)
+000008 - Selective zentralverriegelung (SPS, PR-4K2/4K7/4K8)
+000016 - Theft alarm system (PR-7AN/7AL)
+000032 - Inclination sensor (PR-7AN/7AL)
+000064 - Interior sensor (PR-7AL)
+000128 - Comfort function over FFB (not PR-B29/B30/B34/B35)
+000256 - Right steering wheel (PR-L0R)
+000512 - Avant (back window break recognition, PR-K8D)
+001024 - Heckrollo (PR-3Y2/3Y5)
+002048 - Honk to acknowledgement DWA (PR-A8U)
+004096 - -SAE tail lamps (the USA, PR-A8U)
+008192 - Light package (PR-QQ1)
+016384 - no SAFE function (PR-A8U)
+065536 - Theft alarm system deceleration time (0 seconds)
+131072 - Equipment Highline (rear lights LED)
+262144 - Sun roof (PR-3FE/3FR)
+524288 - Multi-function equipment (PR-F0X/F4E/F4F/F4G/F4J/F4Q/F4X/F4Z/F5F)
Controller adjustment
STG 46 (comfort system) select
STG adjustment - > function 10
- > channel 01 (Personalisierung key 1)
- > channel 02 (Personalisierung key 2)
- > channel 03 (Personalisierung key 3)
- > channel 04 (Personalisierung key 4)
Default value SPS: 96
Default value ZV: 111
+00001 - Passenger door
+00002 - Door at the rear left
+00004 - Door in the back right
+00008 - Trunk
+00016 - Auto-LOCK
+00032 - Comfort-opens FH front
+00064 - Comfort-opens FH in the rear
+00128 - Sun roof open
+00256 - Heckrollo automatically drive out
+00512 - Dimmwert - interior light = 1%
+01024 - Dimmwert - interior light = 2%
+02048 - Dimmwert - interior light = 4%
+04096 - Dimmwert - interior light = 8%
+08192 - Dimmwert - interior light = 16%
+16384 - Dimmwert - interior light = 32%
+32768 - Dimmwert - interior light = 64%
- > channel 15 (inclination sensor)
Alarm threshold (default value: 200)
200 - 100% = 0,0°
180 - 090% = 0,1°
160 - 080% = 0,2°
140 - 070% = 0,3°
120 - 060% = 0,4°
100 - 050% = 0,5°
- > channel 61 (comfort functions)
+001 - Comfort latches over radio for window lifters
+002 - Comfort-open over radio for window lifters
+004 - Comfort latches over radio for sun roof
+008 - Comfort-open over radio for sun roof
+016 - Comfort latches over FH switch FT for FH
+032 - Comfort-open over FH switches FT for FH
+064 - Comfort latches over FH switch FT for sun roof
+128 - Comfort-open over FH switches FT for sun roof
+256 - Comfort latches over closing aster for window lifters
+512 - Comfort latches over closing aster for sun roof
- > channel 62 (ZV functions)
+1 - ZV to flashing
+2 - ZV on flashing
+4 - Kl. the 87 USA logic
{steering wheel electronics}
Controller coding
STG 16 (steering wheel electronics) select
STG coding - > function 07
?xxxxx: Execution
0 - Link steering wheel
1 - Right steering wheel
x?xxxx: Steering column adjustment
0 - no electrical steering column adjustment
1 - with electrical steering column adjustment
xx??xx: Steering wheel execution
00 - Standard steering wheel (no multi-function, no Tiptronic, does not heat)
11 - Sport steering wheel with Tiptronic
20 - Multi-function steering wheel (no Tiptronic at the steering wheel, does not heat)
21 - Multi-function steering wheel with Tiptronic (does not heat)
22 - Multi-function steering wheel heats (no Tiptronic)
23 - Multi-function steering wheel heats with Tiptronic
xxxx?x: Function equipment
0 - no on board computer, no GRA, no ACC
1 - On board computer, no GRA, no ACC
2 - with GRA, no on board computer
3 - with ACC, no on board computer
4 - On board computer, GRA
5 - On board computer, ACC
xxxxx?: Karosserievariante
1 - Sedan
2 - Avant (tail wiper)
{shining width adjustment}
Controller coding
STG 55 (shining width adjustment) select
STG coding - > function 07
LWR (standard)
00003 - Steel feather/spring without AFS (PR-8Q3 and 1BA/1BD/1BE/1BR/1BV)
00004 - Steel feather/spring with AFS (PR-8Q3 and 1BK)
LWR with AFS (curve light)
Note: The coding is protected by an Security ACCESS. Security ACCESS code: 02000
00016 - Steel feather/spring (PR-8Q5 and 1BA/1BD/1BE/1BR)
00017 - with pneumatic cushioning (PR-8Q5 and 1BK)
Controller adjustment
STG 55 (shining width adjustment) select
STG adjustment - > function 10
- > channel 20 (show-room-effekt) (only AFS)
0 - activates
1 - deactivates
Controller basic adjustment
STG 55 (shining width adjustment) select
STG of measured value blocks - > function 08
Group of measured values of 001
Go to basic adjustment
Now the headlights manually adjust.
Group of measured values of 001
Go to basic adjustment
The rule situation of the headlights "is learned" now by the controller.
{engine electronics}
Controller Security ACCESS
STG 01 (engine electronics) select
STG Security ACCESS - > function 16
ACC Aktivierungscode: 13647
GRA Aktivierungscode: 11463
ACC/GRA Deaktivierungscode: 16167
{tire pressure monitoring}
Controller coding
STG 65 (tire pressure monitoring) select
STG coding - > function 07
?xxxxx: System
0 - 1 antenna, 433 MHz (PR-7K7)
1 - 1 antenna, 315 MHz (PR-7K8)
2 - +4 triggers, 433 MHz (PR-7K3)
3 - +4 triggers, 315 MHz (PR-7K4)
4 - at present does not occupy (4 antennas, 433 MHz)
5 - at present does not occupy (4 antennas, 315 MHz)
6 - 4 antennas, Japan (PR-7K5; reduced transmitting power)
x?xxxx: Functions
0 - Remainder of the world (RdW)
1 - Remainder of the world (RdW), fail-safe
2 - Remainder of the world (RdW), specially load
3 - Remainder of the world (RdW), specially load, fail-safe
4 - The USA
5 - The USA, fail-safe
6 - The USA, specially load
7 - The USA, specially load, fail-safe
xx?xxx: Target pressure VA part-load
1 - 1.x bar
2 - 2.x bar
3 - 3.x bar
xxx?xx: Target pressure VA part-load
0 - x.0 bar
1 - x.1 bar
2 - x.2 bar
3 - x.3 bar
4 - x.4 bar
5 - x.5 bar
6 - x.6 bar
7 - x.7 bar
8 - x.8 bar
9 - x.9 bar
xxxx?x: Target pressure hectar part-load
1 - 1.x bar
2 - 2.x bar
3 - 3.x bar
xxxxx?: Target pressure hectar part-load
0 - x.0 bar
1 - x.1 bar
2 - x.2 bar
3 - x.3 bar
4 - x.4 bar
5 - x.5 bar
6 - x.6 bar
7 - x.7 bar
8 - x.8 bar
9 - x.9 bar
{telephone/mobile phone preparation}
Controller adjustment
STG 77 (telephone) select
STG adjustment - > function 10
- > channel 128 (basic volume audio)
So far no further information.
- > channel 129 (hunting time mobile phone)
From 30 seconds to 30 min in seven intervals.
- > channel 130 (waiting period)
Waiting period reference channel for synchronisation with audio components.
- > channel 131 (microphone sensitivity)
So far no further information.
- > channel 133 (Bluetooth)
Activation/deactivation, so far no further information.
- > channel 134 (Bluetooth Freisprechfunktion)
Acquits only with inserted mobile telephone, so far no further information.
- > channel 135 (Bluetooth pin)
So far no further information.
- > channel 136 (BEEP Delay value)
Time interval between depressing the key and acknowledgement clay/tone.
{door expensive devices}
Controller coding (in front)
STG 42 (door expensive equipment in front/left) select
STG 52 (door expensive equipment in front/right) select
STG coding - > function 07
+000000 - Normal glass (PR-4KC)
+000001 - Tracer for gas cap unblocking (the USA, PR-A8U)
+000002 - Door interior grasp lighting (pre-setting)
+000004 - Damming glass (PR-4KR/4KV)
+000008 - Door door/warning lamps (pre-setting)
+000016 - Right steering wheel (PR-L0R)
+000032 - Top illumination door cowl (Ambientebel., PR-QQ1)
+000064 - Apron lighting (PR-QQ1)
+000128 - Outside mirror with MEMORY (PR-6XF/6XL)
+000256 - Mirror heating (PR-6XD/6XE/6XF/6XJ/6XK/6XL)
+000512 - Switch for support rod (pre-setting)
+001024 - Execution Avant
+002048 - el. Safety device for children rear (PR-4H5)
+004096 - Opening assistance
+008192 - Tightening assistance (PR-GZ2)
+016384 - Keyless entry (Kessy, PR-4F2/4K5/4K7)
+065536 - eFH mechanism run deactivate
+131072 - Injuring vehicle
+262144 - Special protection vehicle
+524288 - Ueberschusskraftbegr. and eFH Automatikl. deactivate
Controller coding (in the back)
STG 62 (door expensive equipment in the back/left) select
STG 72 (door expensive equipment in the back/right) select
STG coding - > function 07
+000000 - Normal glass (PR-4KC)
+000002 - Door interior grasp lighting (pre-setting)
+000004 - Damming glass (PR-4KR/4KV)
+000008 - Door door/warning lamps (pre-setting)
+000032 - Top illumination door cowl (Ambientebel., PR-QQ1)
+000512 - Switch for support rod (China)
+001024 - Execution Avant
+002048 - el. Safety device for children rear (PR-4H5)
+016384 - Keyless entry (Kessy, PR-4F2/4K5/4K7)
{entrance/starting authorization}
Controller coding
STG 05 (entrance/starting authorization) select
STG coding - > function 07
+001 - Standard (always set)
+002 - Mechanism
+004 - Advance key
+008 - Land variant the USA
+016 - Right steering wheel
+032 - Achievement reduction (Japan/South Korea)
+064 - Special vehicle
+128 - Avant
{auxiliary/condition heating}
Steeuergeraet coding
STG 18 (auxiliary/condition heating) select
STG coding - > function 07
00?xx: Stop valve for cooling agent -N279
0 - no stop valve -N279 blocks
1 - Stop valve -N279 blocks (standard)
00x?x: Circulation pump -V55
0 - without auxiliary/condition heating (no circulation pump -V55 -)
1 - with auxiliary/condition heating (with circulation pump -V55 -)
00xx?: Undervoltage disconnection
1 - over controller for energy management -J644
2 - over fixed voltage level (adjustment)
The eigendiagnose should take place with an CAN able test equipment, thus can all controllers be addressed.
The following controllers are already here contained:
- longitudinal control
- Airbag
- trailer recognition
- brake electronics
- indicator/control unit (in front)
- automatic transmission
- electrical system I
- electrical system II
- a park assistance
- parking brake
- combination instrument
- comfort system
- steering wheel electronics
- shining width adjustment
- engine electronics
- level control
- tire pressure monitoring
- satellite radio
- telephone/mobile phone preparation
- door expensive devices
- entrance/starting authorization
- auxiliary/condition heating
{Airbag}
Controller coding
STG 15 (Airbag) select
STG coding - > function 07
Note: Due to the large number of possible codings you ask please a specific inquiry with part number and appropriate index by email.
Controller adjustment
STG 15 (Airbag) select
STG adjustment - > function 10
Over the adjustment the Airbageinheiten is activated, and/or deactivated, depending upon motor vehicle type and/or model must be available not all channels.
0 - activates
1 - deactivates
- > channel 01 (AirbagBeifahrerseite)
- > channel 02 (Airbagdriver's side)
- > channel 03 (SeitenairbagBeifahrerseite)
- > channel 04 (Seitenairbagdriver's side)
- > channel 05 (belt-tautBeifahrerseite)
- > channel 06 (belt-tautdriver's side)
{trailer recognition}
Controller coding
STG 69 (trailer recognition) select
STG coding - > function 07
0000?xx: Handwheel
0 - without serving aster
3 - Handwheel for mechanical swiveling function
0000x?x: Trailer connector set
0 - without mechanical swiveling function
3 - mechanical swiveling function
0000xx?: Land selection
1 - Remainder of the world (RdW)
2 - The USA
3 - Australia
{indicator/control unit (in front)}
Controller coding
STG 07 (indicator/control unit in front) select
STG coding - > function 07
?xxxxx: Vehicle configuration
+1 - Driver information system (FIS)
+2 - Ausfuerung South America
+4 - 4-Tasten-Bedienteil
x?xxxx: Vehicle configuration
+1 - internal amplifier (sound system)
+2 - Karosserievariante "Avant"
+4 - Leather equipment
xx?xxx: Vehicle configuration
+1 - Seat position in front
+2 - Seat position in the back
+4 - Right steering wheel
xxx?xx: Vehicle configuration
+1 - A park assistance in the back
+2 - Refendruck control system
+4 - Pneumatic cushioning
xxxx?x: Vehicle configuration
+1 - Adaptive Cruise Control (ACC)
+2 - Ambientebeleuchtung
+4 - A park assistance in front
xxxxx?: Land coding
1 - German
2 - English (GB)
3 - English (US)
4 - Spanish
5 - Italian
6 - French
7 - Portuguese
8 - reserves
9 - Chinese
Controller adjustment
STG 07 (indicator/control unit in front) select
STG adjustment - > function 10
- > channel 001 (mm iv-building list)
Sheeting list for MMI functionality CAR menu.
+00001 - adaptive cruise control (PR-8T4)
+00002 - Ambientenbeleuchtung (PR-QQ1)
+00004 - acoustic parking system in front (PR-7X2)
+00008 - acoustic parking system in the back (PR-7X1/7X2)
+00016 - Tire pressure control system (PR-7K3/7K4/7K5)
+00032 - Pushing/issuing roof (PR-3FE/3FR)
+00064 - adaptive air suspension (PR-1BK)
+00256 - Rain sensor (PR-8N3)
+00512 - one touch MEMORY (PR-4K5/4K6)
+01024 - Seat position in front (PR-3PN)
+02048 - Seat position in the back (PR-5Z1)
+04096 - Multi-function steering wheel (e.g. PR-1XW)
+16384 - Telematics (emergency call system/PR-9ZH/9ZS/9ZV)
- > channel 002 (MMI Anzeigeoptionen)
Indicator option for MMI functionality CAR menu.
?xx: Karosserievariante
0 - Sedan (PR-4F0)
1 - Avant (PR-4F0 K8D)
x?x: Chassis number
0 - Chassis number (VIN) do not indicate
1 - Chassis number (VIN) indicate
xx?: Karosserievariante
0 - Right steering wheel (PR-L0R)
1 - Link steering wheel (PR-L0L)
- > channel 003 (author turn value)
Time interval for the automatic reasoning of MMI Hinweismenues.
- > channel 004 (speed threshold)
Speed, starting from which the functions Car menu is switched off.
- > channel 005 (speed delta)
Delta, starting from that the functions Car menu and training procedure one touch of the MEMORY to be again activated (e.g. speed threshold = 15 km/h, speed delta = 5 km/h - > disconnection with 15 Km/h, activation with 10 km/h).
- > channel 006 (MMI hunting time)
Time interval between switching off and automatic driving of the MMI down.
- > channel 011 (MMI function range)
Additional MMI functions
0 - Log book not available
1 - Log book available (standard)
- > channel 012 (type of telephone)
0 - no telephone/telematics
2 - Mobile phone preparation
4 - Telematics
- > Kanel 064 (brightness search lighting)
Change brightness the operating sector search lighting (changes in the controller are not stored).
- > Kanel 065 (brightness function lighting)
Change brightness the operating sector function lighting (changes in the controller are not stored).
- > Kanel 066 (MMI display)
MMI display in-/-switch off.
- > channel 067 (brightness display lighting)
Change brightness MMI display lighting (changes in the controller are not stored).
- > channel 068 (MMI test pattern)
Test pattern on that MMI display spend.
0 - no test pattern
1 - Red
2 - Green
3 - Blue
4 - White
5 - Black
6- Chessboard (black and white)
7 - Chessboard (inverse)
8 - 64 gray tones (vertical bars)
- > channel 096 (transmitting power)
Reduces the transmitting power of the optical bus by half (changes in the controller are not stored).
- > channel 111 (MMI system RESET)
To activate MMI a RESET accomplished over again coded and/or adapted values.
{electrical system I}
Controller coding
STG 09 (electrical system I) select
STG coding - > function 07
?xxxxx: Steering column MEMORY
0 - without steering column MEMORY and/or manual steering column
1 - with steering column MEMORY
x?xxxx: Floor space lighting
0 - Floor space lighting as lamp blocks
1 - Floor space lighting as LED blocks
xx?xxx: Headlight
0 - Halogen headlight without SRA
1 - Halogen headlight with SRA
2 - Bi-xenon-headlight
3 - Bi-xenon-headlight with AFS
xxx?xx: Headlight
0 - without automatic headlight
1 - with automatic headlight with sensor rain/photosensor
xxxx?x: Day headlight
0 - without day headlight
1 - with day headlight not selectable over MMI
2 - with day headlight selectable over MMI
xxxxx?: Land variant
1 - Remainder of the world (RdW)
2 - North countries (Finland, Sweden, Norway, Denmark)
3 - THE USA (US)
4 - Canada (CDN)
{electrical system II}
Controller coding
STG 4F (electrical system II) select
STG coding - > function 07
x?xxx: Glove compartment unblocking
1 - actively (standard)
xx?xx: Inclination sensor
0 - does not block (PR-7AA)
1 - blocks (PR-7AL/7AN)
xxx?x: Sun roof
0 - does not block (PR-3FA/3FL)
1 - blocks (PR-3FE/3FR)
?xxx?: Engine variant
0xxx3 - 6-Zylinder diesel engine 3.0l (PR-T41/1N3)
1xxx4 - 8-Zylinder petrol engine 4.2l (PR-T79/T8T/1N3)
0xxx4 - Other basic engine (PR-TB3/T14/T15/T44/T45/T61/T9G/TQ0/TA1/1N3)
Controller adjustment
STG 4F (electrical system II) select
STG Security ACCESS - > function 16
Before the adjustments to be accomplished to be able ACCESS an appropriate Login must be made by the Security. Logincode: 12151
STG adjustment - > function 10
- > channel 1 (inclination sensor threshold)
Alarm threshold in X - and Y direction (default value: 80)
- > channel 2 (heading for time Handschuhksten)
Activaton time for the glove specialized opening (default value: 100)
- > channel 3 (play protection counter)
Time after that is reduced the play protection counter around 1 (default value: 20)
- > channel 4 (play protection counters)
Threshold for the play protection counter, starting from which a control is prevented (default value: 20)
{parking brake}
Controller coding
STG 53 (parking brake) select
STG coding - > function 07
000??xx: Engine variant
01 - 2,0l TDI
02 - 2,5l TDI
03 - 3,0l TDI
04 - 4,0l TDI
05 - 2,7l TDI
10 - 2,0l T FSI
20 - 2,4l MPI
30 - 2,8l FSI
40 - 3,0l MPI
50 - 3,2l FSI
60 - 4,2l MPI
70 - 4,2l FSI
000xx?x: Transmission variant
1 - Transmission ML310
2 - Automat AL420
3 - Multitronic VL300
4 - Multitronic VL380
5 - Transmission ML450
6 - Automat AL600
7 - Transmission ML350
000xxx?: Land variant
1 - Remainder of the world (RDW)
2 - USA/Canada
3 - Japan
Controller basic adjustment
STG 53 (parking brake) select
STG basic adjustment - > function 04
Group of measured values of 006 (brakes close)
Group of measured values of 007 (brakes open)
It lasts approx.. 5 seconds, until the brakes are completely opened.
Group of measured values of 010 (functional test)
The brake opens and closes 3 time.
Group of measured values of 020 (angle of inclination sensor calibrate)
After approx.. 2 seconds without movement the value is stored, after approx.. the basic adjustment is terminated 12 seconds.
{combination instrument}
Controller coding
STG 17 (combination instrument) select
STG coding - > function 07
???xxx: Extra options and optional extras
+000 - no extra options
+001 - second tank characteristic and/or Quattrocodierung
+002 - without FIS (Fof ahrerinformationssystem)
+004 - Clutch vehicle (no mechanism)
+008 - second pair of tire extent
+016 - Tire pressure control
+032 - Pneumatic cushioning (adaptive air suspension)
+064 - AFS (dyn. LWR with Advanced Frontlighting System)
+128 - ACC (Adaptive Cruse Control)
+256 - 70-Liter tank (only front wheel drive)
xx?xx: Land variant
0 - Germany (DE)
1 - Remainder of the world link steering wheel (RdW)
2 - THE USA (US)
3 - Canada (CDN)
4 - Great Britain (GB)
5 - Japan link steering wheel (JP)
6 - Saudi Arabia (SA)
7 - Australia (OUT)
8 - Remainder of the world right steering wheel (RdW)
9 - Japan right steering wheel (JP)
xxx?x: Belt warning
0 no belt warning
1 Belt warning Europe NCAP (optical durable warning, acoustic warning for 91 seconds actively)
2 Belt warning USA/Canada old
(optical and acoustic warning for 6 seconds)
3 Belt warning USA/Canada NAR again
(optical durable warning, acoustic warning every 30 seconds)
4 Belt warning Europe NCAP (including front seat passengers)
(optical durable warning, acoustic warning for 91 seconds actively)
5 Belt warning USA/Canada old (including front seat passengers) (optical and acoustic warning for 6 seconds)
6 Belt warning USA/Canada NAR again (including front seat passengers) (optical durable warning, acoustic warning every 30 seconds)
xxxx?: Lighting options
0 - Pointer and scales OUT (Kl.15 & Kl.58 out)
1 - Pointer, scales OUT (Kl.15 & Kl.58 out)
2 - Pointer OUT, scales (Kl.15 & Kl.58 out)
3 - Pointer and scales (2nd characteristic - Kl.15 & Kl.58 out)
Controller adjustment
STG 17 (combination instrument) select
STG adjustment - > function 10
Notes:
- there are in the A6 (4F) 2 different countries groupings in the case of the maintenance interval attitudes to carries comes.
- the maintenance interval channels are to be adapted in the following order: 45>43>42>44>49 and/or. 45>42>43>49>44.
Countries group 1 (flexible wartungsintervall): Germany, Belgium, Denmark, Finland, France, Greece, Great Britain, Ireland, Iceland, Italy, Kanari islands, Luxembourg, the Netherlands, Norway, Malta, Austria, Portugal, Sweden, Switzerland/light stone, Spanien/Andorra, Tschechien, Cyprus
Countries group 2 (firm wartungsintervall): Canada and the USA, Poland, Turkey, New Zealand, Australia, China, GUS (without the Baltic, Ukraine, white Russia), special requirement South America (without Argentina, Brazil, Chile), Romania, Chile, special requirement the Near East (Jordan, Syria, Lebanon), special requirement the middle east (Iraq, Afganistan), special requirement Africa (without north/South Africa), South Africa, special requirement North Africa (Egypt, Algeria, Libya, Morocco, Tunesien), special requirements Brunei, Albania, Macedonia, Argentina, Estland, Litauen, Belarus (white Russia), Bahrain, Kuwait, Qatar, Dubai
- > channel 02 (service interval announcement)
To "00000" puts back enters and the value stores.
- > channel 03 (consumption gauge)
The base value is 100 now can it the whole in 1% steps adjust, the respective maximum values is 85 (%) and/or. 115 (%).
- > channel 09 (odometers)
The values give the distance to in the km counter are later indicated (e.g. 11356 for km conditions of 113.560km).
Before the combination instrument the new km conditions accepted must take place a Login with "13861 ".
- > channel 19 (radio clock)
The adjustment of the synchronisation duration for the radio clock takes place in minutes, to which value 0 does not correspond the condition a radio clock blocked.
Range of values: 0 - 50 minutes
- > channel 29 (tank giver characteristic 2) (only Quattro)
The base value is 128 now can it in 1er steps adjust, this corresponds 1/4 litre. The respective maximum values are 120 and/or. 136. The translation of the tank giver characteristic is made by the whole range.
- > channel 30 (tank giver characteristic 1)
The base value is 128 now can it in 1er steps adjust, this corresponds 1/4 litre. The respective maximum values are 120 and/or. 136. The translation of the tank giver characteristic is made by the whole range.
- > channel 31 (wet measuring)
Adjustment of the level of fuel in the tank with first filling at the volume. This value serves for the correction, after first switches on for the ignition corrects the combination instrument the tank giver resistance on the indication of litre angebene in this channel.
- > channel 32 (dead volumes)
Adjustment of the volume not seized by the tank giver. This must take place before the Erstbefuellung in the channel 31.
- > channel 33 (full measuring)
Adjustment of the upper half of the tank giver characteristic, this is stretched and/or shrinks. The base value is 128 and can in 1 ohm steps between 112 and 144 be veriiert. In order to start the correction is as the first adjustment value 65535 to be entered.
- > channel 35 (adjustment of the number of revolutions threshold)
The adjustment value 0 corresponds to an oil pressure warning stopped by the factory, if the oil pressure falls at a number of revolutions of 1500 1/min under 1,2 bar. The adjustment can take place in 250er steps (0 - 1000 ).
0000 - 1000 U/min
0250 - 1750 U/min
0500 - 2000 U/min
0750 - 2250 U/min
1000 - 2500 U/min
- > channel 38 (oil min warning)
Adjustment of the oil min warning with low oil level. Before the attitude a Login with 13861 must take place.
0 - deactivates
1 - activates
- > channel 39 (TOG sensor)
Over this channel festeglegt whether the temperature and oil level giver(TOG) in the combination instrument is blocked. Before the attitude a Login with 13861 must take place.
0 - deactivated (in the combination instrument does not block)
1 - activated (in the combination instrument blocks)
- > channel 40 (driven way STR since last service)
The input of the respective desired value is only in steps from 100 km possible, thus effected also the announcement in the display.
- > channel 41 (time since last service)
The input of the respective desired value is only in steps from days possible, thus effected also the announcement in the display in days.
- > channel 42 (minimum km road performance)
The indication takes place in 100km (150x100=15.000km).
080 - firm wartungsintervall (8,000 km/5,000 miles)
150 - flexible wartungsintervall (15.000km)
- > channel 43 (maximum km road performance)
The indication takes place in 100km (e.g. 150x100=15.000km).
080 - firm wartungsintervall (8,000 km/5,000 miles)
300 - flexible wartungsintervall (30,000 km/19,000 miles)
-> channel 44 (maximum time interval)
The indication takes place in days.
365 - firm wartungsintervall (group of 2 countries)
730 - flexible wartungsintervall (group 1 countries)
- > channel 45 (oil quality)
1 - firm wartungsintervall (group of 2 countries)
2 - flexible wartungsintervall (group 1 countries)
- > channel 46 (total consumption quantity) (only gasoline)
The value indicated in litres represents not actual consumption, but an arithmetic procedure for the service announcement from different engine data and run achievement.
- > channel 47 (soot entry) (only Diesel)
The indicated value represents a reference value, for the service announcement. The indicated value is an arithmetic procedure for the soot portion in the engine oil, related to a distance of 100 km.
- > channel 48 (thermal load) (only Diesel)
The indicated value represents a reference value, for the service announcement. The indicated value is an arithmetic procedure for the thermal load in the engine oil, related to a distance of 100 km.
- > channel 49 (minimum time interval)
The indication of the time takes place in days.
365 - firm wartungsintervall (all group of 2 countries)
365 - flexible wartungsintervall (gasoline engines - group 1 countries)
730 - flexible wartungsintervall (Diesel engines - group 1 countries)
{comfort system}
Controller coding
STG 46 (comfort system) select
STG coding - > function 07
+000001 - Standard (always active)
+000002 - 10 Tamperalarme (GB/Irland, PR-B09)
+000004 - Lockcylinder unlocks ZV electrically (PR-7AA/8AU)
+000008 - Selective zentralverriegelung (SPS, PR-4K2/4K7/4K8)
+000016 - Theft alarm system (PR-7AN/7AL)
+000032 - Inclination sensor (PR-7AN/7AL)
+000064 - Interior sensor (PR-7AL)
+000128 - Comfort function over FFB (not PR-B29/B30/B34/B35)
+000256 - Right steering wheel (PR-L0R)
+000512 - Avant (back window break recognition, PR-K8D)
+001024 - Heckrollo (PR-3Y2/3Y5)
+002048 - Honk to acknowledgement DWA (PR-A8U)
+004096 - -SAE tail lamps (the USA, PR-A8U)
+008192 - Light package (PR-QQ1)
+016384 - no SAFE function (PR-A8U)
+065536 - Theft alarm system deceleration time (0 seconds)
+131072 - Equipment Highline (rear lights LED)
+262144 - Sun roof (PR-3FE/3FR)
+524288 - Multi-function equipment (PR-F0X/F4E/F4F/F4G/F4J/F4Q/F4X/F4Z/F5F)
Controller adjustment
STG 46 (comfort system) select
STG adjustment - > function 10
- > channel 01 (Personalisierung key 1)
- > channel 02 (Personalisierung key 2)
- > channel 03 (Personalisierung key 3)
- > channel 04 (Personalisierung key 4)
Default value SPS: 96
Default value ZV: 111
+00001 - Passenger door
+00002 - Door at the rear left
+00004 - Door in the back right
+00008 - Trunk
+00016 - Auto-LOCK
+00032 - Comfort-opens FH front
+00064 - Comfort-opens FH in the rear
+00128 - Sun roof open
+00256 - Heckrollo automatically drive out
+00512 - Dimmwert - interior light = 1%
+01024 - Dimmwert - interior light = 2%
+02048 - Dimmwert - interior light = 4%
+04096 - Dimmwert - interior light = 8%
+08192 - Dimmwert - interior light = 16%
+16384 - Dimmwert - interior light = 32%
+32768 - Dimmwert - interior light = 64%
- > channel 15 (inclination sensor)
Alarm threshold (default value: 200)
200 - 100% = 0,0°
180 - 090% = 0,1°
160 - 080% = 0,2°
140 - 070% = 0,3°
120 - 060% = 0,4°
100 - 050% = 0,5°
- > channel 61 (comfort functions)
+001 - Comfort latches over radio for window lifters
+002 - Comfort-open over radio for window lifters
+004 - Comfort latches over radio for sun roof
+008 - Comfort-open over radio for sun roof
+016 - Comfort latches over FH switch FT for FH
+032 - Comfort-open over FH switches FT for FH
+064 - Comfort latches over FH switch FT for sun roof
+128 - Comfort-open over FH switches FT for sun roof
+256 - Comfort latches over closing aster for window lifters
+512 - Comfort latches over closing aster for sun roof
- > channel 62 (ZV functions)
+1 - ZV to flashing
+2 - ZV on flashing
+4 - Kl. the 87 USA logic
{steering wheel electronics}
Controller coding
STG 16 (steering wheel electronics) select
STG coding - > function 07
?xxxxx: Execution
0 - Link steering wheel
1 - Right steering wheel
x?xxxx: Steering column adjustment
0 - no electrical steering column adjustment
1 - with electrical steering column adjustment
xx??xx: Steering wheel execution
00 - Standard steering wheel (no multi-function, no Tiptronic, does not heat)
11 - Sport steering wheel with Tiptronic
20 - Multi-function steering wheel (no Tiptronic at the steering wheel, does not heat)
21 - Multi-function steering wheel with Tiptronic (does not heat)
22 - Multi-function steering wheel heats (no Tiptronic)
23 - Multi-function steering wheel heats with Tiptronic
xxxx?x: Function equipment
0 - no on board computer, no GRA, no ACC
1 - On board computer, no GRA, no ACC
2 - with GRA, no on board computer
3 - with ACC, no on board computer
4 - On board computer, GRA
5 - On board computer, ACC
xxxxx?: Karosserievariante
1 - Sedan
2 - Avant (tail wiper)
{shining width adjustment}
Controller coding
STG 55 (shining width adjustment) select
STG coding - > function 07
LWR (standard)
00003 - Steel feather/spring without AFS (PR-8Q3 and 1BA/1BD/1BE/1BR/1BV)
00004 - Steel feather/spring with AFS (PR-8Q3 and 1BK)
LWR with AFS (curve light)
Note: The coding is protected by an Security ACCESS. Security ACCESS code: 02000
00016 - Steel feather/spring (PR-8Q5 and 1BA/1BD/1BE/1BR)
00017 - with pneumatic cushioning (PR-8Q5 and 1BK)
Controller adjustment
STG 55 (shining width adjustment) select
STG adjustment - > function 10
- > channel 20 (show-room-effekt) (only AFS)
0 - activates
1 - deactivates
Controller basic adjustment
STG 55 (shining width adjustment) select
STG of measured value blocks - > function 08
Group of measured values of 001
Go to basic adjustment
Now the headlights manually adjust.
Group of measured values of 001
Go to basic adjustment
The rule situation of the headlights "is learned" now by the controller.
{engine electronics}
Controller Security ACCESS
STG 01 (engine electronics) select
STG Security ACCESS - > function 16
ACC Aktivierungscode: 13647
GRA Aktivierungscode: 11463
ACC/GRA Deaktivierungscode: 16167
{tire pressure monitoring}
Controller coding
STG 65 (tire pressure monitoring) select
STG coding - > function 07
?xxxxx: System
0 - 1 antenna, 433 MHz (PR-7K7)
1 - 1 antenna, 315 MHz (PR-7K8)
2 - +4 triggers, 433 MHz (PR-7K3)
3 - +4 triggers, 315 MHz (PR-7K4)
4 - at present does not occupy (4 antennas, 433 MHz)
5 - at present does not occupy (4 antennas, 315 MHz)
6 - 4 antennas, Japan (PR-7K5; reduced transmitting power)
x?xxxx: Functions
0 - Remainder of the world (RdW)
1 - Remainder of the world (RdW), fail-safe
2 - Remainder of the world (RdW), specially load
3 - Remainder of the world (RdW), specially load, fail-safe
4 - The USA
5 - The USA, fail-safe
6 - The USA, specially load
7 - The USA, specially load, fail-safe
xx?xxx: Target pressure VA part-load
1 - 1.x bar
2 - 2.x bar
3 - 3.x bar
xxx?xx: Target pressure VA part-load
0 - x.0 bar
1 - x.1 bar
2 - x.2 bar
3 - x.3 bar
4 - x.4 bar
5 - x.5 bar
6 - x.6 bar
7 - x.7 bar
8 - x.8 bar
9 - x.9 bar
xxxx?x: Target pressure hectar part-load
1 - 1.x bar
2 - 2.x bar
3 - 3.x bar
xxxxx?: Target pressure hectar part-load
0 - x.0 bar
1 - x.1 bar
2 - x.2 bar
3 - x.3 bar
4 - x.4 bar
5 - x.5 bar
6 - x.6 bar
7 - x.7 bar
8 - x.8 bar
9 - x.9 bar
{telephone/mobile phone preparation}
Controller adjustment
STG 77 (telephone) select
STG adjustment - > function 10
- > channel 128 (basic volume audio)
So far no further information.
- > channel 129 (hunting time mobile phone)
From 30 seconds to 30 min in seven intervals.
- > channel 130 (waiting period)
Waiting period reference channel for synchronisation with audio components.
- > channel 131 (microphone sensitivity)
So far no further information.
- > channel 133 (Bluetooth)
Activation/deactivation, so far no further information.
- > channel 134 (Bluetooth Freisprechfunktion)
Acquits only with inserted mobile telephone, so far no further information.
- > channel 135 (Bluetooth pin)
So far no further information.
- > channel 136 (BEEP Delay value)
Time interval between depressing the key and acknowledgement clay/tone.
{door expensive devices}
Controller coding (in front)
STG 42 (door expensive equipment in front/left) select
STG 52 (door expensive equipment in front/right) select
STG coding - > function 07
+000000 - Normal glass (PR-4KC)
+000001 - Tracer for gas cap unblocking (the USA, PR-A8U)
+000002 - Door interior grasp lighting (pre-setting)
+000004 - Damming glass (PR-4KR/4KV)
+000008 - Door door/warning lamps (pre-setting)
+000016 - Right steering wheel (PR-L0R)
+000032 - Top illumination door cowl (Ambientebel., PR-QQ1)
+000064 - Apron lighting (PR-QQ1)
+000128 - Outside mirror with MEMORY (PR-6XF/6XL)
+000256 - Mirror heating (PR-6XD/6XE/6XF/6XJ/6XK/6XL)
+000512 - Switch for support rod (pre-setting)
+001024 - Execution Avant
+002048 - el. Safety device for children rear (PR-4H5)
+004096 - Opening assistance
+008192 - Tightening assistance (PR-GZ2)
+016384 - Keyless entry (Kessy, PR-4F2/4K5/4K7)
+065536 - eFH mechanism run deactivate
+131072 - Injuring vehicle
+262144 - Special protection vehicle
+524288 - Ueberschusskraftbegr. and eFH Automatikl. deactivate
Controller coding (in the back)
STG 62 (door expensive equipment in the back/left) select
STG 72 (door expensive equipment in the back/right) select
STG coding - > function 07
+000000 - Normal glass (PR-4KC)
+000002 - Door interior grasp lighting (pre-setting)
+000004 - Damming glass (PR-4KR/4KV)
+000008 - Door door/warning lamps (pre-setting)
+000032 - Top illumination door cowl (Ambientebel., PR-QQ1)
+000512 - Switch for support rod (China)
+001024 - Execution Avant
+002048 - el. Safety device for children rear (PR-4H5)
+016384 - Keyless entry (Kessy, PR-4F2/4K5/4K7)
{entrance/starting authorization}
Controller coding
STG 05 (entrance/starting authorization) select
STG coding - > function 07
+001 - Standard (always set)
+002 - Mechanism
+004 - Advance key
+008 - Land variant the USA
+016 - Right steering wheel
+032 - Achievement reduction (Japan/South Korea)
+064 - Special vehicle
+128 - Avant
{auxiliary/condition heating}
Steeuergeraet coding
STG 18 (auxiliary/condition heating) select
STG coding - > function 07
00?xx: Stop valve for cooling agent -N279
0 - no stop valve -N279 blocks
1 - Stop valve -N279 blocks (standard)
00x?x: Circulation pump -V55
0 - without auxiliary/condition heating (no circulation pump -V55 -)
1 - with auxiliary/condition heating (with circulation pump -V55 -)
00xx?: Undervoltage disconnection
1 - over controller for energy management -J644
2 - over fixed voltage level (adjustment)
04-16-2005, 01:46 PM
#6
AudiWorld Member
Thread Starter
Join Date: Mar 2000
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Excellent!
I think I would likely just disable it. Lexus offers a free "customization" whenever you purchase one of their cars (or at least the dealer here does) it's a shame the Audi dealers aren't as up front about it, I usually have to coerce mine into changing anything.
De-seatbelt gong and making remote windows would be pretty close to xanadu, the lawyer screen would finish it off.
De-seatbelt gong and making remote windows would be pretty close to xanadu, the lawyer screen would finish it off.
04-16-2005, 01:50 PM
#7
AudiWorld Member
Thread Starter
Join Date: Mar 2000
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Very useful, Kitora! Primitive translation follows...
I wonder if the "land" setting would remove the lawyer screen if you set it to say GB? of course that might move the steering wheel to the wrong side of the car 
Trending Topics
04-16-2005, 10:25 PM
#9
AudiWorld Senior Member
Join Date: Jun 2001
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
The seatbelt gong is there for a reason.
Even though it's really annoying for the owners the reason it's there is to obtain 5 stars in the Euro NCAP tests. Without this feature it would only be possible to get 4 stars.
04-17-2005, 04:14 AM
#10
AudiWorld Member
Join Date: May 2002
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
holding the unlock button down on remote opens the window? how?
I know putting the key in the hole still works but the dealer told me you cannot open and close the windows and sunroof anymore using the remote. Audi does not allow it anymore.