a8 front brake setup
#1
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I am looking for information on a front brake setup for a 1999 a8( rotors,calipers & pads)
i remember seeing a porsche set up on the forum for the a8 which was somewhat economical.
i remember seeing a porsche set up on the forum for the a8 which was somewhat economical.
#3
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
When he gets back, perhaps he'll give us an update. Check Audipages to see what he's doing.<ul><li><a href="http://www.audipages.com/upgrades/birabrakeupgrade.html">A8 Brake Upgrade to BIRA.org System 6</a></li></ul>
#4
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
.
See their "Street Sport Front" <A HREF="http://www.stasisengineering.com/brakes.htm">here</a>. I believe this uses the same 4-pot Brembo that's used on the S8.
I upgraded my S8 rears to the Stasis 298x20mm 2-piece rotor shown for their S4 "Track Sport" and "Motor Sport" Rear. With an S4 carrier and
a Stasis adapter, it was a perfect fit. The S4 and S8 use a different rear carrier, but the calipers are identical.
<img src="http://www.stasisengineering.com/images/SSBrembo2.jpg">
See their "Street Sport Front" <A HREF="http://www.stasisengineering.com/brakes.htm">here</a>. I believe this uses the same 4-pot Brembo that's used on the S8.
I upgraded my S8 rears to the Stasis 298x20mm 2-piece rotor shown for their S4 "Track Sport" and "Motor Sport" Rear. With an S4 carrier and
a Stasis adapter, it was a perfect fit. The S4 and S8 use a different rear carrier, but the calipers are identical.
<img src="http://www.stasisengineering.com/images/SSBrembo2.jpg">
Thread
Thread Starter
Forum
Replies
Last Post
ImolaPR
S4 / RS4 (B5 Platform) Discussion
10
12-06-2005 05:06 PM
Steve_Ag Arrow
Performance and Tuning
8
08-23-2002 03:52 AM