Any ideas on time and difficulty of replacing tierod inner and outer assembly. ECS quoted me $150
05-03-2005, 09:21 AM
#1
AudiWorld Super User
Thread Starter
Any ideas on time and difficulty of replacing tierod inner and outer assembly. ECS quoted me $150
labor which is a nice price, but the timing to get my car in is kinda hard. If this was a couple hour job without special tools, I was considering attacking it this weekend. I purchased MEYLE complete tierod assembly for both sides for 130 bucks shipped! Anyone replaced the whole assembly before?
05-05-2005, 09:32 PM
#2
New Member
Join Date: Sep 2004
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any ideas on time and difficulty of replacing tierod inner and outer assembly. ECS quoted me $1
taga8 did it - look for his post. The crowfoot tools were different for existing and new tie rod. They were 38mm and 41mm made by V8 tools. If it's $150 for both sides it may be a very good deal.
I need to do mine soon but havent got around to it. If I cound find $150 here in Minneapolis I would do it...
BTW if my calculations are correct you can use a 1.5" for the 38mm and a 1 5/8" for the 41mm
I need to do mine soon but havent got around to it. If I cound find $150 here in Minneapolis I would do it...
BTW if my calculations are correct you can use a 1.5" for the 38mm and a 1 5/8" for the 41mm
Thread
Thread Starter
Forum
Replies
Last Post
Im@wesome~ out!
A4 (B5 Platform) Discussion
10
04-18-2007 02:29 AM
Max_A6
A6 / S6 (C5 Platform) Discussion
9
11-14-2006 05:01 PM
veryfastS4
S4 / RS4 (B5 Platform) Discussion
3
09-22-2004 06:18 PM