A8 / S8 (D2 Platform) Discussion Discussion forum for the D2 Audi A8 and S8 produced from 1994-2002
Sponsored by:
Sponsored by:

Fitting New Rotors on an A8

Thread Tools
 
Search this Thread
 
Old 10-02-2002, 06:07 PM
  #11  
Junior Member
 
RCBENZ2's Avatar
 
Join Date: Oct 2001
Posts: 976
Likes: 0
Received 0 Likes on 0 Posts
Default

Fun!
Old 10-03-2002, 02:16 AM
  #12  
New Member
Thread Starter
 
johnA84.2's Avatar
 
Join Date: Sep 2002
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1 lb.-ft. equals 1.356 Newton-meters, so 22 lb-ft=30 N-m and 140 lb-ft=190 N-m

Hi Skiracer, my disks at the front have TWO sets of Pads EACH, it's a 1998 Model.?????......Thanks again JOHNA84.2
Old 10-03-2002, 05:15 AM
  #13  
AudiWorld Super User
 
skiracer's Avatar
 
Join Date: Aug 2001
Posts: 3,714
Received 16 Likes on 12 Posts
Default You have the multi-piston caliper, you lucky boy........

<center><img src="http://pictureposter.audiworld.com/24433/multi-piston_front_brake.jpg"></center><p>According to the ETKA, these were not available until the 2000 model year. Whatever.... In that case, follow Randy's instructions for the S8. It doesn't look as if this caliper uses a seperate carrier unit- it is integrated into a single assembly. So ignore the part about removing the caliper carrier- you don't have one! There I go, jumping to conclusions and putting my foot in my dentures...........
Old 10-03-2002, 01:07 PM
  #14  
New Member
Thread Starter
 
johnA84.2's Avatar
 
Join Date: Sep 2002
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default Re: You have the multi-piston caliper, you lucky boy........

Thanks Skiracer, Don't know why I have the later ones fitted, Is it because it's a euro model????
JOHNA8 4.2
Old 10-03-2002, 01:48 PM
  #15  
AudiWorld Super User
 
skiracer's Avatar
 
Join Date: Aug 2001
Posts: 3,714
Received 16 Likes on 12 Posts
Default That's likely it- my ETKA database is for the US models. (Kjell has the Euro version)

Euro models vary quite a bit in some respets from the US models (engine availability, options, when various improvements were introduced, not to mention the fact that the A8 was available in Europe a full two years before its US introduction). You may want to get the European ETKA parts database on CD, or a www.alldatadiy.com subscription if they have one for the Euro models.
Old 10-03-2002, 09:44 PM
  #16  
New Member
Thread Starter
 
johnA84.2's Avatar
 
Join Date: Sep 2002
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default Re: That's likely it- my ETKA database is for the US models. (Kjell has the Euro version)

I would like to get a copy of the ETKA database on CD Skiracer, where can I get hold of one?. JOHNa8 4.2
Old 10-04-2002, 05:03 AM
  #17  
AudiWorld Super User
 
skiracer's Avatar
 
Join Date: Aug 2001
Posts: 3,714
Received 16 Likes on 12 Posts
Default I purchased mine off of ebay for around $20. Keep your eyes open, as they come up often.

One consideration- you need to have a high-resolution display to use this database- at least 1280X1024. I found this on ebay for $19 plus $5 shipping:<ul><li><a href="http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;item=1865960612">http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&amp;item=1865960612</a</li></ul>
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Billy Khan
TT (Mk3) Discussion
1
07-31-2018 05:53 AM
no.radar
A6 / S6 (C5 Platform) Discussion
2
02-25-2005 02:54 PM
a4kasper
A4 (B5 Platform) Discussion
11
05-26-2004 10:14 AM
99A8Q
A8 / S8 (D2 Platform) Discussion
13
04-14-2004 10:39 AM
A4Tuned
A4 (B5 Platform) Discussion
13
07-10-2002 10:27 AM



Quick Reply: Fitting New Rotors on an A8



All times are GMT -8. The time now is 08:22 PM.