A8 / S8 (D2 Platform) Discussion Discussion forum for the D2 Audi A8 and S8 produced from 1994-2002
Sponsored by:
Sponsored by:

Intake Manifold Linkage Arms - Unbreakable Replacements

Thread Tools
 
Search this Thread
 
Old 06-30-2014, 07:43 PM
  #81  
AudiWorld Junior Member
 
Gearhead62's Avatar
 
Join Date: Apr 2012
Location: CHICAGO - North Burbs
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

Its probably time for me to invest in a pair of the Delrin Arms.... I'm running with one original and one fabbed from coat hanger wire.... It's held up fine for 24 months (little rusty).

Separate note and should be a separate entry but this thread helped me repair a frozen runner, so I have allegiance to it and all who gave great info, links on the cleanup process.

Anyway, my 2001 A8L / D2 is at 174K miles... And since I picked it up in '02, its finally broken in and flyin' like it has less than 50K... Never any powertrain issues - just normal A8 misc stuff. Is the 4.2 bulletproof or am I lucky? Any 200K+ or 250K+ out there?

Its a silver beauty... long may she run
GH62
Old 07-01-2014, 05:46 AM
  #82  
AudiWorld Member
 
JoePGT5S's Avatar
 
Join Date: Nov 2011
Location: Hopewell NJ
Posts: 116
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Gearhead62
Is the 4.2 bulletproof or am I lucky? Any 200K+ or 250K+ out there?

Its a silver beauty... long may she run
GH62
241k and counting. Car feels a little down on power; however I think it may be one of the cats (drivers side is original) getting a bit restricted.
Old 07-01-2014, 10:39 AM
  #83  
AudiWorld Junior Member
 
Gearhead62's Avatar
 
Join Date: Apr 2012
Location: CHICAGO - North Burbs
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

Wow.. 241K... Well done.. Any tips?
Old 07-18-2014, 05:26 PM
  #84  
AudiWorld Member
 
AudiNut87's Avatar
 
Join Date: May 2013
Location: san diego, ca
Posts: 178
Likes: 0
Received 0 Likes on 0 Posts
Default

mine has 198k and running like a champ ! these cars will run forever if you replace the cheap plastic stuff that should of (and once was) made from metal.
Old 01-11-2016, 08:29 AM
  #85  
Former Vendor
Thread Starter
 
gruvenparts.com's Avatar
 
Join Date: Oct 2009
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Default


Audi/VW 4.2V8 Intake Linkage Arms !


GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms (p/n 077198327A)! The OEM versions quickly break, leaving your intake manifold rod stuck, causing poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the 4.2L V8.

Our intake manifold arms have an aerospace grade billet aluminum body with thread on carbon fiber composite ball end links. The composite end links are actually STRONGER than the aerospace grade aluminum body itself!

This is how we can warranty them for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

OEM P/N 077198327A (077-198-327A)
Old 01-26-2016, 08:08 AM
  #86  
Former Vendor
Thread Starter
 
gruvenparts.com's Avatar
 
Join Date: Oct 2009
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Default


Audi/VW 4.2V8 Intake Linkage Arms !


GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms (p/n 077198327A)! The OEM versions quickly break, leaving your intake manifold rod stuck, causing poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the 4.2L V8.

Our intake manifold arms have an aerospace grade billet aluminum body with thread on carbon fiber composite ball end links. The composite end links are actually STRONGER than the aerospace grade aluminum body itself!

This is how we can warranty them for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

OEM P/N 077198327A (077-198-327A)
Old 02-02-2016, 08:16 AM
  #87  
Former Vendor
Thread Starter
 
gruvenparts.com's Avatar
 
Join Date: Oct 2009
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Default


Audi/VW 4.2V8 Intake Linkage Arms !


GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms (p/n 077198327A)! The OEM versions quickly break, leaving your intake manifold rod stuck, causing poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the 4.2L V8.

Our intake manifold arms have an aerospace grade billet aluminum body with thread on carbon fiber composite ball end links. The composite end links are actually STRONGER than the aerospace grade aluminum body itself!

This is how we can warranty them for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

OEM P/N 077198327A (077-198-327A)
Old 02-15-2016, 08:19 AM
  #88  
Former Vendor
Thread Starter
 
gruvenparts.com's Avatar
 
Join Date: Oct 2009
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Default


Audi/VW 4.2V8 Intake Linkage Arms !


GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms (p/n 077198327A)! The OEM versions quickly break, leaving your intake manifold rod stuck, causing poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the 4.2L V8.

Our intake manifold arms have an aerospace grade billet aluminum body with thread on carbon fiber composite ball end links. The composite end links are actually STRONGER than the aerospace grade aluminum body itself!

This is how we can warranty them for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

OEM P/N 077198327A (077-198-327A)
Old 03-21-2016, 08:30 AM
  #89  
Former Vendor
Thread Starter
 
gruvenparts.com's Avatar
 
Join Date: Oct 2009
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Default


Audi/VW 4.2V8 Intake Linkage Arms !


GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms (p/n 077198327A)! The OEM versions quickly break, leaving your intake manifold rod stuck, causing poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the 4.2L V8.

Our intake manifold arms have an aerospace grade billet aluminum body with thread on carbon fiber composite ball end links. The composite end links are actually STRONGER than the aerospace grade aluminum body itself!

This is how we can warranty them for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

OEM P/N 077198327A (077-198-327A)
Old 04-27-2016, 08:52 AM
  #90  
Former Vendor
Thread Starter
 
gruvenparts.com's Avatar
 
Join Date: Oct 2009
Posts: 880
Likes: 0
Received 0 Likes on 0 Posts
Default


Audi/VW 4.2V8 Intake Linkage Arms !


GruvenParts.com 4.2L V8 Intake Manifold Linkage Arms Warranted for Life !

Got a 4.2L V8 Audi or VW ? Then you had better check your intake manifold actuator arms (p/n 077198327A)! The OEM versions quickly break, leaving your intake manifold rod stuck, causing poor idle, drivability, loss of power, and poor fuel mileage. This is a very common problem on the 4.2L V8.

Our intake manifold arms have an aerospace grade billet aluminum body with thread on carbon fiber composite ball end links. The composite end links are actually STRONGER than the aerospace grade aluminum body itself!

This is how we can warranty them for life!

Dont go to the VW/Audi dealer and pay upwards of $400 for the new actuator kit when all you need are the arms (the actuators themselves rarely fail). And DONT pay that kind of money for another set of plastic arms that will break in quick order.

Go with GruvenParts.com and NEVER WORRY ABOUT THIS AGAIN !

Fits the following vehicles:

2004-2007 VW Phaeton V8
2003+ VW Touareg V8
2002-2004 Audi A6/Avant
1998-2004 Audi A6/S6 Quattro
2000+ Audi A8/S8 Quattro

OEM P/N 077198327A (077-198-327A)


Quick Reply: Intake Manifold Linkage Arms - Unbreakable Replacements



All times are GMT -8. The time now is 10:31 AM.