A8 / S8 (D2 Platform) Discussion Discussion forum for the D2 Audi A8 and S8 produced from 1994-2002
Sponsored by:
Sponsored by:

Supercharger Orientation, with vacuum formed airbox mold

Thread Tools
 
Search this Thread
 
Old 09-15-2007, 08:52 PM
  #1  
New Member
Thread Starter
 
LemonA8's Avatar
 
Join Date: Aug 2007
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
Default Supercharger Orientation, with vacuum formed airbox mold

<center><img src="http://pictureposter.audiworld.com/131990/s8_supercharger_4_037.jpg"></center><p>Pays to stay in touch with everyone . My college roommate works for a vacuum form plastic mold company. I gave him a drawing and 8 days later he gave me 4 prototype molds for my supercharger airbox . Well folks it fits in the engine bay like a factory Audi part. Needless to say my buddy is thinking about buying an S8-A8, most likely I will need a second test mule and his efforts deserve to be rewarded in free horsepower.
Old 09-16-2007, 09:36 AM
  #2  
AudiWorld Super User
 
PaulW's Avatar
 
Join Date: Jul 2001
Location: Wilbur by the Sea
Posts: 18,685
Received 55 Likes on 48 Posts
Default How will it get driven? An auxiliary belt or make the existing belt larger?

From your picture, it appears it will have to get driven by something below it.

Very interesting!
Old 09-16-2007, 11:50 AM
  #3  
New Member
Thread Starter
 
LemonA8's Avatar
 
Join Date: Aug 2007
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
Default

auxiliary belt
Old 09-17-2007, 05:18 AM
  #4  
Member
 
jazbo123's Avatar
 
Join Date: Apr 2006
Posts: 1,850
Likes: 0
Received 0 Likes on 0 Posts
Default Don't forget to review the temperature rating of the plastic...

For underhood it should be =/&gt;125C
Old 09-17-2007, 06:05 AM
  #5  
AudiWorld Senior Member
 
gtreng1's Avatar
 
Join Date: Apr 2005
Posts: 606
Likes: 0
Received 0 Likes on 0 Posts
Default Dude, you rock. If this works, everyone is going to hop on board....let me know

if you need any solid modeling or analysis help.
The airbox can also be rapid prototyped (less expensive b/c no tooling required)
Old 09-17-2007, 07:49 AM
  #6  
AudiWorld Senior Member
 
BrianC72gt's Avatar
 
Join Date: Jan 2004
Location: Nor Cal
Posts: 680
Received 8 Likes on 7 Posts
Default Re: auxiliary belt

Off the main crank pulley?..Is there clearance for that? E-machine shop has a nice tutorial on how to design a pulley wheel.

Are you planning an AFPR indexed off manifold pressure. I'm the naysayer who said fueling was going to be a big problem. I so want to be wrong.

What are the specs on that blower?

Good luck!
Old 09-17-2007, 02:59 PM
  #7  
AudiWorld Member
 
brittcrowell's Avatar
 
Join Date: May 2005
Posts: 358
Likes: 0
Received 0 Likes on 0 Posts
Default Boost #s

So what Kind of boost are we talking about?
The A8 is such a dog up in CO after having it around sea level. Every time I drive out there, I do something stupid when I try and pull out in front of someone or something, oops only 225hp, not 300!
It would be nice just to have some supercharger normalizing if your at altitude. So even a 1-2lbs of boost would be nice out there.
I haven't been following the list much lately, so forgive me if all of this has been covered.
Any $$$ figures yet?

Britt
Old 09-17-2007, 07:58 PM
  #8  
New Member
Thread Starter
 
LemonA8's Avatar
 
Join Date: Aug 2007
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
Default

without touching the engines guts, 6psi which should equal 21hp per lb of boost
Old 09-18-2007, 05:53 AM
  #9  
AudiWorld Senior Member
 
KYNZ's Avatar
 
Join Date: Aug 2003
Posts: 1,515
Likes: 0
Received 0 Likes on 0 Posts
Default so you are talking 126hp increase over stock...WOAH!!! thats crazy! I cant wait for more info!

this is like being told a story as a little kid...every night you get a little bit more...so far this is very impressive. Please keep us posted and ideally keep track of what all parts/mods/etc are necessary to do this. Cost is always important too heheh.
Old 09-18-2007, 02:11 PM
  #10  
New Member
Thread Starter
 
LemonA8's Avatar
 
Join Date: Aug 2007
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
Default

i'm already shopping for a 5-6 speed manual gearbox and related parts


Quick Reply: Supercharger Orientation, with vacuum formed airbox mold



All times are GMT -8. The time now is 01:24 AM.